Refresh Hold - ICEL MD-6520 Instruction Manual

REFRESH HOLD

You can use the setup mode to enable the Refresh Hold when you are
working on a difficult measuring field. This function will auto trigger or update
HOLD value with new measuring value, and sound a tone to remind user. The
operation of push-button is same as the operations of Data hold.
Press "HOLD" button to enter Refresh Hold mode. The present value will
be held, and the sign of
measuring value once the variation of measuring value exceed the setting of
variation count, and the sign of
updated until the measuring value is stable, then stop flash and light
and sound a tone to remind user.
35
will be lit. It will be ready to hold new
will be flashed. The hold value will be
Figure- 28 Refresh Hold
Copyright© 2005 LT. All rights reserved.
The sign
be flashed until
measuring value is
stable and updated
will