Page 1
K6-Team Bluetooth-Adapter K6 Bt 2 Duplex Bluetooth Serial Adapter for multiple baud rates (HW 8.1.0, FW 2.1) The K6 Bt provides a connection between a device with a serial RS232 port (GPS device, e.g. flight recorder, flarm, variometer) and a bluetooth enabled device (e.g. PDA, Smartphone, Tablet or PC).
Page 2
After connecting a new serial port (COM port) is available. The COM port number • may differ from computer to computer. 5. Start the program which should receive data from the K6 Bt and choose the serial port assigned to the bluetooth connection in the settings dialogue. finished! K6 Bt 2 Manual www.k6-team.de...
Remove the screws and open the housing to get access to the circuit board. The circuit board itself can remain in the housing during configuration. See image 4 for a drawing of the circuit board with its jumpers: K6 Bt 2 Manual www.k6-team.de...
This way the baud rate can be switched in a fast way. To change the baud rate configuration the K6 bt has to be switched off. baud rate auto 2400 4800 9600 19200 38400 57600 115200 configuration K6 Bt 2 Manual www.k6-team.de...
Page 5
3.2 Additional configuration via terminal program The settings for bluetooth ID, -password and the K6-Team protocol can be changed with a PC. Therefore the jumper TX has to be setted and one of both connection ports has to be connected to the serial port of the PC.
2400, 4800, 9600, 19200, 38400, 57600, 115200 baud automatic baud rate identification for NMEA0183-compliant datasets baud rate changeable via bluetooth (see separate documentation for software developers) Bluetooth-Spezifikation Bluetooth v2.0+EDR, 2,4GHz, range: up to 20m encrypted data communication over serial port profile (SPP) K6 Bt 2 Manual www.k6-team.de...
Page 7
72108 Rottenburg Germany http://www.k6-team.de E-Mail: service@k6-team.de Please don't put old devices into the garbage, return it to us. After the EU FAQ list the devices which are intended specially to the application in means of transportation are excluded from the range of application of the RoHS directive and with it from § 5 ElektroG.