Table of Contents
Advertisement
Quick Links
24V 5.0A Sealed Lead-Acid Charger
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS:
This manual contains safety and operating instructions for your charger.
Before using your charger, read all instructions and cautionary markings on the
battery charger, and the product using the battery.
CAUTION: To reduce the risk of injury, charge only AGM or GEL Sealed Lead
Acid batteries. Other types of batteries may burst causing personal injury and
damage.
WARNINGS:
Do not allow children to operate charger without supervision. Keep out of
the reach of children.
Do not disassemble the charger. Have it serviced or repaired by qualified
service personnel. Incorrect assembly can result in risk of electric shock or
fire.
Never use the charger as a DC power source for any electrical equipment.
Never operate a charger with a damaged cord or plug. Inspect both input
and output cords for any damage before using the charger.
Never unplug a cord by pulling on the cord itself. Always grasp the plug
when disconnecting the charger.
For indoor use only. Do not expose charger to rain, snow or excessive
moisture.
Never charge a frozen battery.
Always place the battery in a well ventilated area during charging.
OWNER'S MANUAL
Model No: 24BC5000T-4
UPG No. 71645 / 71642
Advertisement
Table of Contents
Related Manuals for UPG 24BC5000T-4
Summary of Contents for UPG 24BC5000T-4
- Page 1 UPG No. 71645 / 71642 OWNER’S MANUAL 24V 5.0A Sealed Lead-Acid Charger Model No: 24BC5000T-4 IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS: This manual contains safety and operating instructions for your charger. Before using your charger, read all instructions and cautionary markings on the battery charger, and the product using the battery.
- Page 2 CHARGING A BATTERY: Follow these steps to charge a battery: Check battery-type selection switch to match your batteries - AGM or GEL. Connect the charger DC output cable to the “battery charge” receptacle. Plug the charger power cord into the charger. Plug the power cord into wall outlet.
- Page 3 POWER (ON/OFF) STATUS LED Charger is connected to wall outlet Red LED Charger is not plugged in to wall outlet CHARGING/FAULT STATUS LED (Numbers refer to the Three Stage Charge Cycle section on the previous page) Red ON Fast charge (1) (2) Green Flashing Float/Maintenance charge (3) Green ON-Steady...
- Page 4 Consult the dealer or an experienced radio/TV technician for help. LIMITED WARRANTY STATEMENT Universal Power Group (UPG) warrants your unit to be free from defects in material and workmanship for a period of 1 year from the date of sale to the original user or purchaser.
Need help?
Do you have a question about the 24BC5000T-4 and is the answer not in the manual?
Questions and answers
Explain different lights on the pride motor scooter console
The UPG 24BC5000T-4 charger may charge the battery even when the charging light is not illuminated. This indicates that the light may not reliably show charging status, but the charger can still function correctly. Specific meanings of different lights are not provided in the context.
This answer is automatically generated
@Mr. Anderson Mine doesn't charge when the charging light is off ??? Any other suggestions ???
What causes my battery red charging light not stay on sometimes ? After plugging the charger into the scooter. a couple dozen times it finally stays on ??? Help !!!
The red charging light on the UPG 24BC5000T-4 battery charger may not stay on consistently due to one of the following reasons:
1. Battery voltage is less than 9 volts – The charger enters a 20-hour sleep mode and the light turns off.
2. Battery voltage is less than 14 volts – The red light flashes once every 3 seconds (Fault D).
3. Battery connection is reversed – The red light flashes twice every 3 seconds (Fault C).
4. Battery voltage is too high – The red light flashes three times every 3 seconds (Fault B).
5. Battery is drawing too much current – The red light flashes four times every 3 seconds (Fault A).
6. 12-hour charge timeout – Red light flashes rapidly if the battery did not fully charge within 12 hours.
These fault conditions interrupt normal charging and cause the red light to behave inconsistently.
This answer is automatically generated