Protocol SPY CUBE Instruction Manual

HOW TO USE:
Record Video:
1. Press the On/Off button again to start recording. The blue light
will blink 3 times and go off. The video will start to record and
will automatically save every 5 minutes to the card.
2. To stop recording, press On/Off again. The light will turn on to
steady blue.
Motion Activated Video:
1. Spy Cube is preset to record steadily.
2. To switch to motion-activated recording, press the Mode button
for 3 seconds.
3. The indicator light will blink red and blue and Spy Cube will
then only record when it detects movement.
4. Press the mode button again to switch back.
Photo:
1. Press the Mode button once to enter photo mode.
The indicator light will show steady red.
2. Press the On/Off button once to take a photo. The red LED will
blink once to show the photo is taken.
Night Vision:
1. Press and hold the On/Off button for 2 seconds and release.
The indicator light will blink red twice.
2. To turn off night vision, press and hold the On/Off button for
2 seconds again. The indicator light will blink red three times.
BACK
HOW TO VIEW:
1. Connect Spy Cube to the USB port of your computer or insert
the memory card into a reader (not included).
2. Alternatively, you can view on your TV using the included
TV cable.
RESET:
1. If you are having trouble with the camera, you have the option
to reset.
2. With the camera in standby mode, take the reset pin and insert
it into the reset hole.
3. The blue light will go off. Power the camera back on again
to use.
WARNINGS:
- Research and understand the laws about recording other people.
- Make sure anyone you record understands that they are
being recorded.
- Camera should not get wet.
COVER
Instruction Manual
HD SECURITY
VIDEO CAMERA
SPY CUBE
Read through this entire instruction manual BEFORE using
the Spy Cube. We're dedicated to bringing you well-
designed products that make living fun and easy. We stand
behind all our products and warrant this to be free from
defects in workmanship and materials.
For service claims or questions please consult our website
ProtocolDesign.com.
TM