Do you have a question about the CTVM300AFR and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for AEI Security & Communications CTVM300AFR
Page 1
Wirefree Monitoring System CTVM300AFR 160507-6 AEI Security & Communications Ltd Pack Contents 1 x Wirefree Camera IMPORTANT NOTICES 1 x Camera PSU 1 x Monitor This system is NOT SUITABLE FOR 1 x Monitor PSU EXTERNAL USE. Exposure to moisture may damage this device, render it unsafe for Fixings &...
Page 2
Quick Set Up Guide Tighten to lock position STEP 1 STEP 2 Use the supplied fixing kit to mount the Connect the 7.5VDC PSU to the camera bracket to a wall. Slot the the camera and a suitable mains outlet. camera on to the bracket and tighten USE ONLY THE PSU LABELLED ‘CAMERA’...
Page 3
WARNING The supplied power supplies may get hot during extended periods of use. This is normal and is NOT a hazard. DO NOT COVER the power supply units. STEP 5 STEP 6 Position the monitor in a suitable Connect the monitor PSU to the location on a flat stable surface.
Page 4
PICTURE QUALITY NOTICE: If you experience picture quality issues with this system please try the following. In the event the problem cannot be solved, please contact the AEI Helpline on 0845 1667940 or visit http://www.aei.eu SYMPTOM SOLUTION Rolling/Unsteady Picture Adjust the V-HOLD control on the rear of the monitor Too Bright/Dark Adjust the BRIGHTNESS control on the rear of the monitor Unclear/’Grey’...
Need help?
Do you have a question about the CTVM300AFR and is the answer not in the manual?
Questions and answers