1. Manuals
  2. Brands
  3. ELTEC Manuals
  4. Musical Instrument
  5. TRAPSOUND
  6. Information manual

ELTEC TRAPSOUND Information Manual

Orgdrive cp25 accessories
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
ORGDRIVE CP25
ACCESSORIES
INFORMATIVE MANUAL
Rev. 02 of 20/07/2011

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TRAPSOUND and is the answer not in the manual?

Questions and answers

Summary of Contents for ELTEC TRAPSOUND

  • Page 1 ORGDRIVE CP25 ACCESSORIES INFORMATIVE MANUAL Rev. 02 of 20/07/2011...

  • Page 2: Table Of Contents

    1 - TRAPSOUND RECORDER pag. 3 1.1 - Parts of the system ..................... pag. 4 1.2 - List of the functions ..................... pag. 5 1.3 - Trapsound recorder with automatic start of the organ (Code TS25USB-MRA) pag. 5 ....................1.4 - "Trapsound Manager" ..................pag. 6 1.5 - Trapsound Programmer ..................
  • Page 3 14 - CONTROL CARD FOR SLIDING STOPS (Code RESCOR) pag. 31 15 - CONTROL CARD FOR REVERSERS (Code ORGREV) pag. 32 16 - STRIP 128 LED FOR SIMULATION pag. 32 17 - POWER SUPPLIES pag. 33 18 - SERIAL CABLE pag.

  • Page 4: Trapsound Recorder

    1 - TRAPSOUND RECORDER The TRAPSOUND recorder is an equipment that allows to do the recording and the reproduction single pieces whole concerts organ. Connected through the serial line to the ORGDRIVE unit in console, it memorize and reproduce faithfully the condition of input and output.

  • Page 5: Parts Of The System

    Aluminium case. Dimensions: 215 x 220 x 80 mm. Power: 220 V - 50 Hz. It has inside an industrial Pc board (with static hard disk) and a ELTEC manufacture board (Code TSRE) that interfaces the PC board with the ORGDRIVE system.

  • Page 6: List Of The Functions

    1.3 - TRAPSOUND RECORDER WITH AUTOMATIC STARTING OF THE ORGAN (Code TS25USB-MRA) Sometimes for using the TRAPSOUND recorder it can be rather uncomfortable to reach the console, open it and switch on the organ. The TRAPSOUND recorder with AUTOMATIC STARTING (Code TS25USB-MRA) gives the possibility to switch on and switch off the console (and therefore the organ) directly with the use of the remote control.

  • Page 7: Trapsound Manager

    The programme “TRAPSOUND MANAGER” allows to store up the recording file of a TRAPSOUND recorder on the hard disk of one’s own PC, with the possibility to give to each file useful information concerning the recording (Title, Author, Performer, Category, Liturgical Time, Creation date, Comment).

  • Page 8: Trapsound Programmer

    (maximum distance from the console: 200 m). The potential of the "Trapsound PROGRAMMER" are added to those of the "Recorder TRAPSOUND", offering a more complete product and able to meet the needs of the final user. Base unit PROGRAMMER for external installation (Code PROGEXT).
  • Page 9 Once the programming is done and the desired programmes are enabled, it is "Trapsound PROGRAMMER" that thinks to start the organ at the right time, to control the execution of...
  • Page 10 EXAMPLES OF SCREENS Main screen of "Trapsound PROGRAMMER". Trapsound Programmer PROGRAMMA ABILITATO TIPO NOME PROGRAMMA PROSSIME LINEE DI PROGRAMMAZIONE Dettagli 10:30 Linea n. 01 00:05:17 12:00 Linea n. 02 00:12:05 Dettagli 15:00 Linea n. 03 01:01:29 Dettagli RIPRENDI SOSPENDI PROGRAMMAZIONE...

  • Page 11: Coding Of Different Models

    N. 2 Flash disk USB (Cod. USB-2G) N. 1 Power supply cable 220 V (Code 5020) N. 1 Installation CD "Trapsound Manager" TRAPSOUND recorder with remote control by radio and self-starting of the organ (TS25USB-MRA) The model TS25USB-MRA includes: (reference to the price list) 1 Base unit TRAPSOUND (Code TSPC25USB) N.
  • Page 12 N. 1 Kit connectors for cable connection PROGEXT / TSMRP12 (cable of variable length to order separately) N. 1 Cable connection TRAPSOUND / TSMRP12 L = 1,5 m (Code 5024) N. 1 Power Supply 9V TRAPSOUND recorder with remote control by radio, self-starting of the organ...

  • Page 13: Control System For Swell Box

    2 - CONTROL SYSTEM FOR SWELL BOX The control system ESP10 allows the movement of the shutters of a swell box. Speed, precision, sweetness, power, noiselessness and adaptability are the main characteristics of this equipment: Speed: The revision of the system in 2009 produced an increase of about 25% of the speed.

  • Page 14: Parts Of The System

    2.1 - PARTS OF THE SYSTEM CONTROL UNIT (Code ESC10A - ESC10M) Sheet box with door that can be opened inside which there is an electronic card and a power supply transformer. It must be installed in an easily accessible place, where it is possible to see the pulling system.

  • Page 15: List Of The Functions

    2.2 - LIST OF THE FUNCTIONS Learning of the STROKE OF THE PEDAL It allows to keep the total stroke of the pedal installed in console or to reduce the stroke. Learning of the STROKE OF THE ROD It allows to regulate the stroke of the rod according to the needs of opening of the swell box.

  • Page 16: Coding Of The Products

    stroke of the rod step by step total stroke of the rod between minimum and maximum limits. manual forward/back. test of the switch, buttons and inputs of the pedal. test of the position of the rod. test of the internal/external potentiometer of the pedal. manual forward/back (visualization of the peak current of the engine).

  • Page 17: Configurations Of The System

    2.4 - CONFIGURATIONS OF THE SYSTEM With SLIDER With SLIDER without ORGDRIVE system and ORGDRIVE system ESC10 ESC10 With CONTACT With CONTACT without ORGDRIVE system and ORGDRIVE system ESC10 ESC10...

  • Page 18: Radio Transmission System

    3 - RADIO TRANSMISSION SYSTEM The RADIO TRANSMISSION SYSTEM allows to do the transmission of data between the MASTER unit (console) and SLAVE unit (organ) without using the serial cable. It is enough to install a transmitter in console and a receiver in organ. The advantages that this kind of transmission offers are: •...

  • Page 19: Coding Of Different Models

    3.2 - CODING OF DIFFERENT MODELS RADIO TRANSMITTER for ON/OFF system (Code MTX800-ST) RADIO TRANSMITTER for PROPORTIONAL system (Code MTX800-PR) It is installed inside the console and it is connected to the MASTER unit through a serial cable. CHARACTERISTICS: Frequency band: UHF 869 MHz Power: 220 VAC (8 VA) Dimensions: 75 x 125 x 30 mm Length of the aerial: 65 mm...

  • Page 20: Selectors

    3.3 - SELECTORS RADIO/CAVO SELECTOR for ON/OFF system (Code ORGSRC) RADIO/CAVO SELECTOR for PROPORTIONAL system (Code ORGSRC-PR) SELECTOR for the automatic commutation between RADIO and CABLE. It allows to enable the radio transmission when the cable is disconnected. It is installed in console, near the MASTER unit. The supply also includes: N.1 Kit connectors 9 pole (male + female + case).

  • Page 21: Midi Interface (Code Midikit) Pag

    4 - MIDI INTERFACE (Code MIDIKIT) MIDI (Musical Instrument Digital Interface) is a communication language and a regulations of hardware specifications that permits systems which respect this code to communicate with one another. With the MIDI KIT, the ORGDRIVE system can receive and transmit these signals through the MIDI IN and MIDI OUT ports and therefore connect it to other devices such as keyboards, sequencers, personal computers, etc.

  • Page 22: Tuning Keyboard

    5 - TUNING KEYBOARD The TUNING KEYBOARD is an equipment that is used for tuning all the pipes of the organ. It is able to simulate all the manuals and all the stops of the console (max 8 manuals and 256 stops).

  • Page 23: Accessories Of The Tuning Keyboard

    5.2 - ACCESSORIES OF THE TUNING KEYBOARD RADIO REMOTE CONTROL FOR THE SLIDING OF THE NOTES (Code ORGTA/TEL) Radio remote control with three push-buttons to enable and suspend the sliding of the notes: 1 - Sliding of the notes to the HIGH 2 - Sliding of the notes to the LOW 3 - Pause The receiver, installed in the ORGTAF keyboard unit, assures an high reliability in the...

  • Page 24: Coding Of Different Models

    5.3 - CODING OF DIFFERENT MODELS Code ORGTA13T TUNING KEYBOARD with 13 keys Code ORGTA13R TUNING KEYBOARD with 13 keys and radio remote control for the sliding of the notes CHARACTERISTICS: Plastic box Aluminium top panel Hooks for shoulder belt Dimensions: 260 x 150 x 90 mm Weight: 1,2 kg The ORGTA13T model includes:...
  • Page 25 Code ORGTA61R TUNING KEYBOARD with 61 keys and radio remote control for the sliding of the notes CHARACTERISTICS: Wooden solid painted box Keyboard with 61 semi-weighted keys Power supply: 220 VAC Dimensions 115,5 x 25,5 x 16 cm Weight: 12,5 kg The ORGTA61R model includes: (reference to the price list) N.

  • Page 26: Captures Module

    6 - CAPTURES MODULE The CAPTURE MODULE is a programmable device (such as the ORGDRIVE unit) but limited to a predetermined number of inputs and outputs, particularly suitable for the management of the capture memories of the mechanical organs. The two or three boards (depending on the models) are assembled in an aluminium case. On one side of the case there are all the connectors that connect, through some flat cables, the unit to the ORGMIE strips (for inputs) and ORGMUE (for outputs).
  • Page 27 7 - CONTROL BOARD FOR SLIDER ACTION SOLENOIDS (Code ORGMARE) Control board for the slider action solenoids of the stops. CHARACTERISTICS: Voltage: from 12 to 24 V Input: positive (jumper W1 for negative input ) Output with power MOS Protection fuse (4 A - restorable) Regulation of the CONTROL FORCE (forward-back) with a trimmer out to the cover Fixed excitation time (0,8 sec) Overexcitation time at the maximum voltage at the beginning of the movement...
  • Page 28 8 - CONTROL BOARD FOR VERTICAL SLIDER ACTION SOLENOIDS (Code ORGMARE-V) It can happen that, for organ need, some windchests are placed in a vertical way. The sliders of the stops will have to be supported by magnets also after the initial impulse of 0,8 sec.
  • Page 29 9 - TRANSPOSER BOARD Stand alone microprocessor board that makes the tone trans position (- 4, +3) of a 61 keys keyboard or of a 32 keys pedalboard. This board can be used on electric organs where, during ORGDRIVE system absence, one wants to insert the function of tone transposer.
  • Page 30 10 - 61 POWER AMPLIFIERS BOARD Card with 61 transistors power amplifiers. It can be used to amplify the logical signals with very low currents in power signals. MODELS: ORG61UP Code - POSITIVES inputs and POSITIVES outputs. ORG61UN Code - NEGATIVES inputs and NEGATIVES outputs. Note: The two connection flat are included with the card.
  • Page 31 11 - 3 POWER AMPLIFIERS BOARD Code ORG5A) Card with 3 transistors power amplifiers for the control of particular magnets or more than one magnet at the same time. CHARACTERISTICS: Inputs: POSITIVES (to be connected to the outputs of the ORGDRIVE system) Outputs : POSITIVES Maximum current each output: 5 A Power Supply: 12 ÷...
  • Page 32 13 - BUTTON CONTROL BOARD WITH LAMP (Code RELED) Control card for button stops with lamp. With an impulse the lamp switches on (stop ON) and with another impulse the lamp switches off (stop OFF). This board can be used when, on an organ with stops control magnet (on/off coil), we wish to add further stops, unions or couplers with button control.
  • Page 33 15 - CONTROL CARD FOR REVERSERS (Code ORGREV) Control card for the stop keys with reverser control. If there are not the captures, the ORGDRIVE configuration programme disables the function of the reversers. This board can be therefore used on organs without captures (or with the free combination), when the function of reversers is required.
  • Page 34 17 - POWER SUPPLIES A wide range of SINGLE-PHASE and THREE-PHASE POWER SUPPLIES, with levelling off of the output current, is available. Strength and reliability are the main characteristics of these equipments. They are made by a firm that is specialized in the field of electro-mechanics. All the models are fitted with regulation power connections on the primary of the transformer for calibrating the output voltage.
  • Page 35 SINGLE-PHASE POWER SUPPLIES FOR THE CONSOLE Single-phase (220 VAC) for the captures magnets and the lamps of the console. MODELS: Code ORGPSM15 - 15 (15 A - 15 V - 300 VA) Code ORGPSM20 - 15 (20 A - 15 V - 400 VA) Code ORGPSM10 - 24 (10 A - 24 V - 300 VA) Code ORGPSM15 - 24 (15 A - 24 V - 400 VA) CHARACTERISTICS:...
  • Page 36 THREE-PHASE POWER SUPPLIES FOR THE ORGAN Three-phase power supplies (380 VAC) for the magnets of the organ. MODELS: Code ORGPST40 - 15 (40 A - 15 V) Code ORGPST60 - 15 (60 A - 15 V) Code ORGPST100 - 15 (100 A - 15 V) Code ORGPST40 - 24 (40 A - 24 V) Code ORGPST60 - 24...
  • Page 37 18 - SERIAL CABLE 6 conductors shielded and twisted cable, realized specifically for the serial line fo the ORGDRIVE system. The main features are: • Shield: tinned copper braid • Laying up of the two elements in pair • RED/BLACK conductor with increase cross sectional area for power supply •...
  • Page 38 0.22 mm² Conduttore Trefolo flessiblie di rame rosso Stranded bare Conductor copper Sezione (mm² ) 0.22 (24AWG) Cross Sectional area (mm² ) Isolamento PVC qualità R2 (CEI 20-11) con proprietà Insulation ritardante la fiamma Special flame retardant PVC compound acc. to CEI 20- 11 quality R2 Bianco, Marrone;...
  • Page 39 19 - CONNECTORS FOR SERIAL CABLE Plastic screw AMPHENOL CONNECTORS suitable for industrial applications, where safety is an important factor. Each configuration is equipped with 6 poles and a ground contact pre-installed. Contacts are to be soldered. The plug connectors have integrated a cable protection, while the stuffing box nut on the back of the connector has a thread PG9.
  • Page 40 22 - POCKET (Code ORGPK) Terminal that allows to do the programming of the P-TABLE. It is possible to set or modify the data of the FIXED COMBINATIONS, MIXTURES, TUTTI, CRESCENDO, AUTOMATIC PEDAL, VENTILS, without using a PC. It is connected to the MASTER unit in console through the connector P2-POCKET that is on the panel of the ORGVIEM serial card.
  • Page 41 24 - REGULATION BOARD FOR HALL SENSORS (Code HALTA TEST) The HALTA TEST card allows to do the regulation of the hall sensors of an HALTA card without using the ORGDRIVE system. Note: SENSOR REGULATION means the regulation of the screws with magnet that are inserted on each key of each keyboard.
  • Page 42 CHARACTERISTICS: Power: 9 ÷15 VAC / VDC (recommended 9 V) Direct test of a keyboard with Hall sensors Numbers of keys: 26 ÷ 61 SELECTION [ - ] and CONFIRM [ + ] buttons Operability compatible with test of the ORGDRIVE system and of the pulling system for the swell box ESP10 Selector for TRUE/FALSE sensors Test menu, settings, learning...

This manual is also suitable for:

Esp10

Table of Contents