Page 1
This quick guide is a summary of the complete installation manual. The manual contains safety warnings and other explanations which must be taken into account. The installation manual can WARNING be downloaded by going to the "Downloads" section of Erreka website: http://www.erreka.com/Automatismos/descargaDocumentos.aspx Contents supplied...
Page 2
Console language setting 1 Turn on the console using the on/off switch. This will display the message: ERREKA ERREKA AUTOMATION enter AUTOMATION ACCES CODE 2 Press Ö. This will display the message: init init init init init init ACCESS CODE...
Page 3
(INSTALL.NO., ZZZZ) and the transmitter code (TRANS. CODE ?, XXXX). Press Ä to programme the transmitter serial number. ERREKA If only the first two figures of the access code are AUTOMATION changed, leaving the other four unchanged (**9999),...
Page 4
Function COPY MEMORY Function SEE TRANS. CODE This function allows all the entries to be copied from This function shows the transmitter code and the one memory card to another, which is very useful when, number of the facility it is part of. for example, making backup copies.
Need help?
Do you have a question about the IRPROGM and is the answer not in the manual?
Questions and answers