Setting The Clock - Philips CCX252AT99 Owner's Manual

12 Setting the Clock

There are three ways to set the clock: Manually, with Automatic
PBS Channel Selection, or with Manual PBS Channel Selection.
With manual clock setting, you tell the TV/VCR the current time.
The TV/VCR then adjusts the time accordingly. With Automatic
or Manual PBS Channel Selection, the TV/VCR gets the current
time from your local PBS station. It updates the time by referring
to your PBS station broadcasts. If you use either Manual PBS
Channel Selection or Automatic PBS Channel Selection, follow the
steps on page 19 to have the TV/VCR update the clock according
to your Time Zone.
Cable Box users should set the clock manually.
To set the clock manually, follow the steps on pages 12 -13. To
set the clock using Automatic PBS Channel Selection, follow the
steps on pages 14 - 15. To set the clock using Manual PBS
Channel Selection, follow the steps on pages 16 - 17.
Before you begin, make sure:
The TV/VCR is hooked up and turned on. Details are on pages
six - eight.
Channels are programmed. Details are on pages 10 - 11.
You make each entry within 60 seconds of the previous entry.
(If you do not, you may start again at step 1.)
Manual Clock Setting
1
Press the MENU button to display the pop up menu.
PRIM. SETUP PRESS +
B
VCR PROGRAM
VCR SETUP
CAPTION
REMINDER
BRIGHTNESS
2
Press the PLAY/ button or the STOP/
PRIM. SETUP. Then, press the F.FWD/+ button.
PRIMARY SETUP
1 SELECT LANGUAGE
2 AUTO PROGRAMMING
3 ADD/DELETE CHANNEL
4 CH. MEMORY REVIEW
5 VOLUME BAR [ON]
6 SET CLOCK
TO SELECT PRESS NUMBER
TO END PRESS EXIT
3
Press the Number 6 button to select SET CLOCK.
SET CLOCK
1 AUTO CLOCK [ON]
2 SET MANUAL CLOCK
3 DAYLIGHT SVG.TIME [ON]
4 SET TIME ZONE
[AUTO]
TO CONTINUE PRESS MENU
TO SELECT PRESS NUMBER
TO END PRESS EXIT
2
1
button to select
• Entries that do not match the
• To make corrections while you are
• To make corrections after you have
• If you press the STATUS/EXIT but-
2 3
1
5 6
4 o
8 9
7
p
0
+100
o
p
o
PLAY
–
REW F.FWD
STOP
p
o
p
Helpful Hints
TV/VCR's internal calendar will
cause a question mark (?) to
appear on the TV/VCR screen.
setting the clock, press the CLEAR
button until the space for the num-
ber you want to correct is flashing.
Then enter the correct number.
set the clock, start again at step 1.
ton when you are setting the clock,
the TV/VCR will exit Set Clock mode
and return to the program you were
watching.
3
+