Philips VRZ223AT99 Owner's Manual page 14

VRZ223(H1690).QX33 4/9/99 9:09 AM
14 Automatic Channel Setup (cont'd)
Reviewing Memorized Channels
1
Press the VCR button.
2
Press the MENU button.
SELECT op CHOOSE B
PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
TO END PUSH EXIT
3
Press the PLAY/o button or the STOP/p button to select
TUNER SET UP, then press the F.FWD/B button.
SELECT op CHOOSE B
TV
CABLE TV
AUTO PROGRAMMING
ADD/DELETE CH
CH MEMORY REVIEW
TO END PUSH EXIT
4
Press the PLAY/o button or the STOP/p button to select
CH MEMORY REVIEW, then press the F.FWD/B button.
A list of programmed channels will appear on-screen.
If all the programmed channels don't fit on the screen, press
the F.FWD/B button to see the remaining channels. Then
press the REWIND/s button to return to the first screen of
channels.
If you do not press any buttons within 10 seconds, you will
either go to the next screen of channels or you will return to
the previous menu.
5
Press the STATUS/EXIT button once or twice to exit.
Page 14
ON
3-4
1
POWER VCR TV EJECT
1 2 3
VCR/TV
4 5 6
CHANNEL
7 8 9
0 +100
VCR PLUS+
5
SPEED VOLUME MUTE
2 MENU STATUS/EXIT CLEAR MEMORY
REWIND /PLAY F.FWD
REC/OTR /STOP PAUSE/STILL