LG 29FS2 Series Manual page 6

CONNECTION OF EXTERNAL EQUIPMENT
L- AUDIO -R
Y P P L- AUDIO -R
DVD B R L- AUDIO -R
VIDEO
/DTV
IN
ANTENNA
IN
VCR
L- AUDIO -R
L- AUDIO -R
DVD Y P B P R
VIDEO L- AUDIO -R
/DTV
IN
ANTENNA
IN
VCR
VCR
6
You can connect additional equipment, such as VCRs, camcorders
etc. to your set.
What is shown here may be somewhat different from your set.
COMPONENT
Aerial socket
1. Connect the RF out socket of the VCR to the aerial socket on
the back of the set.
2. Connect the aerial cable to the RF aerial in socket of the VCR.
3. Store the VCR channel on a desired programme number using
the 'Manual programme tuning' section.
4. Select the programme number where the VCR channel is
stored.
5. Press the PLAY button on the VCR.
Euro scart socket
1. Connect the Euro scart socket of the VCR to the Euro scart
socket 1, 2 of the set.
COMPONENT
2. Press the PLAY button on the VCR.
If your VCR outputs a switching voltage connect to Euro scart
socket, the set will switch to
But if you want to keep on watching TV mode, press the
or NUMBER buttons.
Otherwise press the TV/AV button on the remote control hand-
set to select
the screen.
You can also record programmes received by the TV on video
tape.
Note :
a.Signal type RGB, i.e. the signals red, green and blue can only be
selected for the Euro scart socket 1 or 2. These signals are trans-
mitted, for example, by a pay TV decoder, game machine or
photo CD unit, etc.
b.If both Euro scart 1 and 2 sockets have been connected to the
VCRs simultaneously, only the AV2 can be received.
Audio/Video in/out sockets (option)
1. Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set and in sockets of the VCR to RF OUT sock-
ets of the set.
2. If the VCR is connected to the AV sockets on the set, press the
TV/AV button to select
3. Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
You can also record programmes received by the TV on video
tape via audio/video out sockets.
Note : If you have a mono VCR, connect the audio cable from the
VCR to the AUDIO L/MONO socket of the set.
A V1 or
A V1 or A V2 . The VCR playback picture appears on
(option) .
A V3
A V2 mode automatically.
D D / E E