Advertisement
OPERATION
STEP 1
ATTENTION: Place the log splitter on
a mat to protect flooring, if necessary.
Insert a log, then push the slidestop
until the log is secure. The magnet will
hold the slidestop in place.
STEP 2
Step down on the foot pedal.
You may need to repeat this step three
or four times to split an average log.
STEP 3
NOTE: Place your foot down on the
base of the log splitter to secure it.
Lift up on the slidestop lever and pull
the slidestop back.
Pull the log out sideways to remove.
9
Advertisement
