In Case Of Exposing The Controller Cable; When Using Junction Box - York CIW01 Installation & Maintenance Manual

2. Attach the controller to the holding bracket and connect the cable as follows.
A. In Case of Exposing the Controller Cable
Secure the holding bracket
Fix the holding bracket
onto the wall with onto the wall with
screws (accessory).
screws (accessory).
B. When Using Junction Box
1. Prepare the optional fi eld-supplied Implanted
Junction Box.
3. Cut away the insulation at the end of the cable and
clamp the M3 solderless terminals (fi eld-supplied).
3. Attach the controller body to the mounted holding bracket. Be careful not to pinch the
cable when attaching it.
4. Peel away the protective fi lm from the liquid crystal display.
6
Cable
Band Stopper
(Field-Supplied)
Trace-out Hole
Attach the stopper (plastic band)
to the cable at the inside of
the draw-out hole.
Feed the cable with its
sheath peeled through
the groove.
Peel away the insulation
at the end of the cable
and clamp the M3 (field-
supplied) solderless
terminals .
2. Feed the cable through the conduit tubing in the wall.
Optional M-size
Junction Box
(Field-Supplied)
Connect the terminals.
Optional S-size
Junction Box
M4 Screws
Remove the
protective film.
P5415484