Specifications - Philips VR888/55 User Manual

B
EFORE
Miscellaneous
A cassette cannot be inserted.
The cassette does not eject.
The cassette ejects when you press REC/OTR ¶, or when
you press POWER to set timer recording.
S
PECIFICATIONS
Number of pre-programmable memory blocks
VR788/888-55 NEW
R
EQUESTING
General
Mains voltage
Mains frequency
Power consumption
Ambient temperature
Relative humidity
Dimensions
Mass
Position for use
Video output channel
Possible number of TV channel
Number of days in advance
Tuner
Aerial input
VHF L:
VHF H:
UHF:
Video
Input (VIDEO IN)
Output (VIDEO OUT)
Resolution
Signal/noise ratio
Audio
Input (AUDIO IN)
Output (AUDIO OUT)
Accessories supplied
26
S
ERVICE
Correction
• Insert the cassette with the window side up and the record
tab facing you.
• Check that a cassette tape is not already inserted. Press
EJECT 0.
• Check that the AC power cord is correctly connected to
an AC outlet.
• If the (Timer) indicator is lit on the display, press
POWER to cancel timer recording, then press EJECT
0.
• Check that the record tab on the back of the cassette is
not removed. ( P.16)
Design and specifications are subject to change without notice.
AC 110 – 240V
50/60Hz
Approx. 22 watts
+5°C to +40°C
10% to 80%
Approx. 400(W) x 94(H) x 336(D) mm
Approx. 3.9kg
Horizontal
UHF E36 (adjustable between E28 — E60)
99
8
365 or every day, or every week
B/G, D/K, I, SECAM K1, M (for VR888/55)
B/G, D/K, I, SECAM K1 (for VR788/55)
42 — 175 MHz
175 — 470 MHz
470 — 870 MHz
CATV
0.5 to 2.0 Vp-p, 75 ohms
1.0±0.2 Vp-p, 75 ohms
Better than 240 lines
Better than 43 dB
–8 dBs, 50k ohms (0dBs=0.775 Vrms) – for RCA connector
–8 dBs, 10k ohms (0dBs=0.775 Vrms) – for SCART connector
–6 dBs, 1k ohms (0dBs=0.775 Vrms)
Remote control unit
RF coaxial cable
Batteries – R6(SUM-3)/AA (only for checking operations)
SCART-RCA cable (for VR788/55)
— 26 —
6/3/99, 11:52 PM
(C )
ONTINUED