Repeat Play 37 - Philips CCA252AT Owner's Manual

Follow the steps below to program the TV/VCR to play a tape
over and over.
1
Press the MENU button.
PRESS
> PRIM. SETUP
B
VCR PROGRAM
VCR SETUP
CAPTION
REMINDER
BRIGHTNESS
2
Press the PLAY/ button or the STOP/
VCR SETUP, then press the F.FWD/B button.
VCR SETUP
ONE TIME PLAY [ON]
>
REPEAT PLAY
ON-SCREEN MODE
DEFEAT RECORDING [OFF]
BLUE BACKGROUND [ON]
SELECT KL CHOOSE B
TO END PRESS EXIT
3
Press the PLAY/ button or the STOP/
REPEAT PLAY, then press the F.FWD/B button so that
ON appears beside REPEAT PLAY.
VCR SETUP
ONE TIME PLAY
> REPEAT PLAY [ON]
ON-SCREEN MODE
DEFEAT RECORDING [OFF]
BLUE BACKGROUND [ON]
SELECT KL CHOOSE B
TO END PRESS EXIT
4
Press the STATUS/EXIT button. Now, when a tape has fin-
ished playing, the TV/VCR will rewind it and start playback again.
(TV programming will appear while the tape is rewinding.)
1
button to select
button to select
• The TV/VCR will stay in Repeat Play
• The real-time counter memory will

Repeat Play 37

2-3
POWER SLEEP
PLAY
REW F.FWD
STOP
STATUS/EXIT
1 2 3
CH.
4 5 6
7 8 9
VOL.
0
ALT. CH
SPEED MEMORY PAUSE/STILL
REC/OTR TRACKING MUTE
Helpful Hints
mode until you set ONE TIME PLAY
to ON, even if the TV/VCR is turned
off. To set ONE TIME PLAY to ON,
follow steps 1-2 above. Then, press
the PLAY/o button or the STOP/p
button to select ONE TIME PLAY.
Press the F.FWD/B button so that
ON appears beside ONE TIME
PLAY. Then, press the STATUS/EXIT
button.
not function during Repeat Play
mode.
4