Philips CCB193AT Owner's Manual page 34

34 Timer Recording (cont'd)
8
Press the Number 1 button to record in SP speed or
press the Number 2 button to record in SLP speed. Details
about tape speed are on page 29. You cannot use the SPEED button
at this time.
ONE TIME PROGRAM
PROGRAM 1
CHANNEL 10
TIME ON 09:30 PM
TIME OFF 11:00 PM
REC SPEED SLP
SP=1 SLP=2
TO CORRECT PRESS CLEAR
TO END PRESS EXIT
9
Press two Number buttons for the month and two
Number buttons for the day you want the program to
record. For example, for July 10, 2000, press 07, 10. The day of
the week and the year will be displayed automatically. (You cannot
program the TV/VCR to record more than one year in advance.)
If you selected a DAILY recording at step 3, you can not enter a
date that is a Saturday or Sunday.
ONE TIME PROGRAM
PROGRAM 1
CHANNEL 10
TIME ON 09:30 PM
TIME OFF 11:00 PM
REC SPEED SLP
START DATE 07/10/2000
MONDAY
TO CORRECT PRESS CLEAR
TO END PRESS EXIT
10
Press the STATUS/EXIT button. PROGRAM WAS COM-
PLETED PLEASE TURN OFF FOR TIMER RECORDING will
appear on the screen.
If there is not a tape in the TV/VCR, PLEASE INSERT CAS-
SETTE also appears on the screen.
If there is a tape without a record tab in the TV/VCR, PLEASE
REMOVE CASSETTE also appears on the screen. If this hap-
pens, insert a different tape.
If PROGRAM NOT COMPLETED appears, start again at step 1.
11
Press the POWER button to turn off the TV/VCR power.
The RECORD light will flash slowly if a tape is in the TV/VCR.
If you forget to turn off the TV/VCR, PLEASE TURN OFF FOR
TIMER RECORDING appears on the TV/VCR screen two minutes
before a timer recording is scheduled to begin.
11
POWER SLEEP/WAKE UP
PLAY
REW
STOP
STATUS/EXIT
8
1 2 3
4 5 6
9
7 8 9
0
SLOW SURF
SPEED MEMORY PAUSE/STILL
REC/OTR TRACKING
Turn off the TV/VCR
for the recording.
Insert a tape in
the TV/VCR.
Leave the Cable
Box/DBS on
(if applicable).
Helpful Hints
• PROGRAM NOT COMPLETED /
CLASH may appear on the screen
when you finish setting a timer
recording. This means that the timer
recording you just programmed and
another timer recording overlap, and
thus the current timer recording will
not be carried out.
• To stop a timer recording that is in
progress, press the STOP/EJECT but-
ton on the TV/VCR. To completely
clear the timer recording so it will not
resume when the TV/VCR power is
turned off, see page 35.
Please see page 54 for more
Helpful Hints.
10
F.FWD
CH.
VOL.
MUTE