Remote Control; Instructions; Prepare The Remote Control; Replace The Remote Control Battery - Hisense HS201C1 User Manual

2.0 channel sound bar home theater system
Table of Contents

Advertisement

Available languages

Available languages

Remote Control

(ON/OFF)
1
SOURCE buttons
2
(MUTE)
3
EN
VOL+/VOL-
4
/PAIR
BF
,
H
G
EQ buttons
5

Prepare the Remote Control

The Remote Control allows the unit to be operated from a distance.
Even if the Remote Control is operated within the effective range 19. 7 feet (6m) inch, remote control
operations may be disrupted if there are any obstacles between the unit and the remote control.
If the Remote Control is operated near other products that generate infrared rays, or if other remote control
devices using infrared rays are used near the unit, it may operate
incorrectly. Conversely, the other products may operate incorrectly.
First-time use:
The unit has a pre-installed lithium CR2025 battery. Remove the
protective tab to activate the remote control battery.

Replace the Remote Control Battery

1. Pull out the battery tray and remove the old battery.
2. Place a new CR2025 battery into the battery tray with correct
polarity (+/-) as indicated.
3. Insert the battery tray back into the slot.
Precautions Concerning Batteries
When the Remote Control is not to be used for a long time (more
than a month), remove the battery from the Remote Control to
prevent it from leaking.
If the batteries leak, wipe away the leakage inside the battery
compartment and replace the batteries with new ones.
Do not use any batteries other than those specified.
Do not heat or disassemble batteries.
Keep away from heat or moisture.
Do not carry or store batteries with other metallic objects.
Doing so could cause batteries to short circuit, leak or explode.
Never recharge a battery unless it is confirmed to be a rechargeable
type.
6
Switch the unit between ON and
STANDBY mode.
Select the play mode.
Mute or resume volume.
Increase/decrease the volume level.
Play/pause/resume playback in
Bluetooth mode.
Press and hold to activate the pairing
function in Bluetooth mode or
disconnect the existing paired
Bluetooth device.
In Bluetooth/USB mode:
Skip to previous/next track.
Select a preset sound effect.

Instructions

1
2
4
5
1
3
2
3
4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents