Table of Contents
Advertisement
Quick Links
_____________________________________________________________________________________________
MICROSCRIBE™ LIMITED HARDWARE WARRANTY
CHAPTER 1 - OVERVIEW
Technical Overview
Release Notes
Figure 1 – What's in the Box?
CHAPTER 2 - GETTING STARTED WITH THE MICROSCRIBE™ G2
The MicroScribe™ G2: Overview
Figure 2 - Guide to MicroScribe Anatomy.
Unpacking and Assembly
Figure 3 – Lifting the MicroScribe out of package.
Figure 4 – The MicroScribe in the Home Position.
Figure 5 – On G2L and G2LX model MicroScribes it is possible to twist the stylus in the home position.
Moving the MicroScribe Around your Home or Office
Figure 6 - The proper way to carry a MicroScribe.
System Connections
Figure 7 – MicroScribe Rear Panel Connections.
Figure 8 - The recommended workspace for the MicroScribe.
The Home Position and Digitizing
Figure 9 - Correct Home Position for the MicroScribe G2.
Figure 10 - The default start-up orientation of the MicroScribe.
CHAPTER 3 - MAINTENANCE AND TROUBLESHOOTING FOR THE MICROSCRIBE™ G2
Caring for Your MicroScribe™ G2
Service and Technical Support
Troubleshooting
CHAPTER 4 - HARDWARE REFERENCE AND SPECIFICATIONS
Connection Pin Assignments
Specifications
INDEX
Table of Contents
1
7
7
7
8
9
9
9
9
10
11
11
12
12
13
13
15
16
16
17
19
19
20
21
23
23
25
27
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Immersion MicroScribe G2
Summary of Contents for Immersion MicroScribe G2
- Page 1 Figure 8 - The recommended workspace for the MicroScribe. The Home Position and Digitizing Figure 9 - Correct Home Position for the MicroScribe G2. Figure 10 - The default start-up orientation of the MicroScribe. CHAPTER 3 - MAINTENANCE AND TROUBLESHOOTING FOR THE MICROSCRIBE™ G2 Caring for Your MicroScribe™...
-
Page 2: Release Notes
Technical Overview The MicroScribe G2 communicates with a host computer through a standard USB port or RS-232 serial port. The system includes the digitizing arm unit, which houses the internal electronics, a USB cable, a serial cable, an input device, and an external power module. -
Page 3: Packaging
Immersion Corporation customer service as soon as possible (408-350-8701; microscribe_tech@immersion.com). Please note that other items that you may have ordered along with your MicroScribe system are not listed below. -
Page 4: Stylus
Figure 2 - Guide to MicroScribe Anatomy. This chapter provides all of the information you will need to connect and begin using the MicroScribe G2. Please read this section before unpacking your system to make sure that the unit is handled correctly. -
Page 5: Packing Materials
You are now ready to unpack the MicroScribe G2 system. After you remove the top protective sheet of foam, you will find that the system is packed as shown in Figure 1. The MicroScribe G2 fits into the large cutout and the accessories, such as the USB cable, power supply, serial cable, and foot pedal, drop into the other cutout. -
Page 6: Stylus - G2L / G2Lx
4. Set the base of the digitizer on a hard flat surface (not on carpet or fabric). Place the stylus into the resting hole on the MicroScribe. This position is referred to as the “Home Position.” See Figure 4. Note that the stylus can only insert one way into the retaining socket. -
Page 7: Stylus
Moving the MicroScribe Around your Home or Office _____________________________________________________________________________________ In addition to using the proper packaging materials for transporting the MicroScribe to and from various locations, you must also take precautions when carrying it around your home or office. The stylus tip is sharp and can be dangerous if not held still during transport. -
Page 8: Power Supply
System Connections _____________________________________________________________________________________ MicroScribe G2 can connect via the USB or serial port of the host computer. Figure 7 – MicroScribe Rear Panel Connections. From left to right: Home button, USB port, power, serial I/O, and accessory input. USB cable... -
Page 9: Placement Of The Microscribe
Figure 8 shows the recommended set-up for digitizing (see Figure 10 for a more detailed example). Note that the rear panel of the MicroScribe G2 faces away from the user and that the MicroScribe G2 is set up along the side of the digitizing workspace. This is completely arbitrary, since the MicroScribe can digitize in any volume it can reach. -
Page 10: Workspace
Bolting the MicroScribe down (optional) The MicroScribe G2 is designed to sit securely on a flat, rigid surface. You may also mount it rigidly to your work surface by using a single bolt (size 3/8 – 16) inserted through your work surface up through the center of the MicroScribe base. -
Page 11: Powering Up And Digitizing
With everything unpacked, connected, and configured, it is time to activate the system and begin digitizing. Checking the Home Position The MicroScribe G2 needs to be in the “Home Position” when the “Home” button is pressed. Otherwise, it may appear that the unit is inaccurate or non-functional. -
Page 12: Starting The Unit
X- and Y-axes. Starting the unit With the MicroScribe G2 in the home position and all connections (USB cable and input device; or serial cable, power supply and input device) made press the “Home” button on the back of the device. - Page 13 Caring for Your MicroScribe™ G2 Your MicroScribe G2 has been designed to require little maintenance and to provide years of trouble-free service. This short section contains suggestions for maintaining your Immersion MicroScribe G2 and servicing it, if necessary.
-
Page 14: Effects Of On The Microscribe
(RMA #). and give you information on how to send the MicroScribe back to our central facility. Once we’ve received and inspected the unit, we will provide an estimate of the repair cost. We do not recommend or authorize any other agents to service the MicroScribe G2, and such repair will void the warranty. -
Page 15: Precautions
If the unit fails to operate normally, check the following points to determine whether the fault can be corrected with the simple measures suggested. If it cannot be corrected, or the fault is not listed below, disconnect all the cords and contact Immersion Corporation for service information or technical support. -
Page 16: Power Light Does Not Illuminate
section is not present, then Windows is not recognizing the device. All cables should be removed; then only the USB cable should be plugged back in. If the status in the Device Manager doesn’t change, shut down the computer and unplug the USB cable from the computer. - Page 17 This section contains information on the MicroScribe™ G2 hardware. Further information is contained in the MicroScribe SDK, which is available to developers on the Immersion web site. This section details all of the physical connections on the outside of the MicroScribe G2 and provides general specifications for the MicroScribe G2 System.
- Page 18 Power Port • Use Immersion Corporation-supplied power supply. Immersion Corporation can provide power supplies for international use. Please call for details. Immersion Corporation is not responsible for any damage resulting from the use of a non-Immersion Corporation authorized power supply.
-
Page 19: Power Port
RS-232C Baud Rate: Up to 115 Kbps Button Options: Foot-pedal, desktop unit, and hand-held units available. Power Requirements: External 115V or 220V power supply Uses +5V DC, 600 mA max. (Immersion Power Supplies CPS5-U) All specifications subject to change by Immersion Corporation. -
Page 20: Position Accuracy
Index ______________________________________________ accessories · 10 Getting Started · 9 Accessory port · 13 air circulation around the MicroScribe · 19 Anatomy of the MicroScribe · 9 Hand Switch · 8 Hardware · 8 Hardware Reference and Specifications · 23 base · 11 heat Base ·... -
Page 21: Table Of Contents
software · 8 Software · 10 Software Development Kit · 7 Packaging · 8 Specifications · 25 PACKING MATERIALS · 10 Starting the unit · 17 Placement of the MicroScribe · 14 stylus · 7, 10, 11, 12, 16 Position Accuracy · 25 Stylus ·...
Need help?
Do you have a question about the MicroScribe G2 and is the answer not in the manual?
Questions and answers
It seems that a short circuit has occurred due to connecting the wrong plug. Is it secured to limit damage
The provided information does not mention any built-in protection against short circuits caused by connecting the wrong plug. However, it does state that Immersion Corporation is not responsible for damage resulting from the use of a non-authorized power supply.
This answer is automatically generated