Table of Contents
Advertisement
38 Quick Programming
Follow the steps below to program your VCR to record TV pro-
grams while you're away from home. The VCR will turn itself on,
record, and turn itself off automatically.
Before you begin, make sure:
•
Channels are programmed. Details are on pages 12-13.
•
The clock is set. Details are on pages 14-18. If the clock is not set,
CLOCK MUST BE SET appears on the screen, followed by the
menu.
•
There is a tape in the VCR. Make sure the tape's record tab is
intact and the tape is long enough to record the program(s).
•
The VCR is in VCR position. The VCR light will appear on the dis-
play panel when the VCR is in VCR position. If the VCR light does
not appear, press the VCR/TV button once.
•
When you use a Cable Box/DBS, timer recordings are pro-
grammed differently. Read pages 8-9 before proceeding.
Complete each step within 60 seconds of the previous step.
1
Press the VCR button, then press the TIMER button.
VCR PLUS+
QUICK PROGRAMMING
PROGRAM REVIEW
SELECT: ,9
CONFIRM: OK
END: TIMER
2
Press the PLAY 8 or STOP 9 button to select QUICK
PROGRAMMING, then press the OK/STATUS button.
ONE TIME PROGRAM
PROGRAM
1
CHANNEL +/– – – –
START +/–
– – : – – AM
STOP +/–
– – : – – AM
REC SPEED
SLP
DATE +/–
– – /– – /– –
DAILY: 8
WEEKLY: 9
CONFIRM: OK
END: TIMER
3
Press the CH(annel) 8/9 button to enter the channel you
want to record.
•
If you are using a standard antenna/cable to VCR to TV hookup (as
shown on pages 6-7), enter the channel of the TV program you
want to record.
•
If you are using a Cable Box/DBS and are not using the Controller,
enter the Cable Box/DBS output channel (03 or 04). Set the Cable
Box/DBS to the channel you want to record. Leave the Cable
Box/DBS on for a timer recording.
•
If you are using the Controller, enter the channel number that you
want to record. The Controller will select the channel at the Cable
Box/DBS.
ONE TIME PROGRAM
PROGRAM
1
CHANNEL +/– 12
CABLE/TV
START +/–
– – : – – AM
STOP +/–
– – : – – AM
REC SPEED
SLP
DATE +/–
– – /– – /– –
DAILY: 8
WEEKLY: 9
CONFIRM: OK
END: TIMER
ONE TIME PROGRAM
PROGRAM
1
CHANNEL +/– 125
DBS
START +/–
– – : – – AM
STOP +/–
– – : – – AM
REC SPEED
SLP
DATE +/–
– – /– – /– –
CABLE/TV OR DBS:0
CONFIRM: OK
END: TIMER
1
CBL / DBS
TV
VCR/TV
POWER
SMARTPICTURE
QUICK PROGRAMMING
+
+
1
2
START
STOP
DATE
-
-
4
5
DAILY
WEEKLY
7
8
SPEED
DBS
0
ALT
CLEAR
STILL/SLOW
-
REW
PLAY
STOP
VOL
OK/STATUS
MENU
TIMER
1
TURBO
AUDIO/
SKIP
MUTE
SEARCH
TIMER
EJECT
Helpful Hint
• If you are using a DBS with the
Controller, CABLE/TV or DBS appears
beside the channel number. You may
need to clarify whether the desired
channel is for Cable TV or Satellite TV
(DBS). If so, "CABLE/TV OR DBS: 0"
will appear at the bottom of the
screen. Press the Number 0 (DBS)
button to select either CABLE/TV or
DBS. Press the button repeatedly to
switch between the CABLE/TV and
DBS settings.
CABLE/TV is to record a cable TV pro-
gram received on the VCR or through
a Cable Box; DBS is to record a satel-
lite program received through a DBS.
VCR
3
6
9
+
FF
2
CH
3
REC END
SEARCH
/OTR
REC
REC
Advertisement
Table of Contents
