Download Print this page

Trico TR-QR280A333MT Manual

Led

Advertisement

Quick Links

LED Pool Light 
The Trico complete LED pool lights are a series of product that specially designed for pool use by adopting SMD LED 
(previously comes in DIP LED) technology which provides wider beaming angle, higher luminous flux, lower luminous decay 
and better color consistency, you can choose auto control or remote control versions for RGB models to cater your different 
site requirements. What's more, the remote control contains up to 10 different color modes which will definitely make 
them ideal products for parties, events and other entertainment occasions. 
Technical Features 
 
12V AC input 
Single color or color 2835 SMD LED's 
120 degree light beam 
Auto control or remote control 
50,000+ hours life expectancy 
Applications 
  Meets the general lighting environment such as: 
 
Swimming pools, fountains and lakes 
Casinos, public entertainment venues 
Spa resorts 
Other places where special atmosphere required 
Specifications 
 
Part Number 
Size (mm) 
TR‐QR280A252MT 
Dia280*H160 
TR‐QR280A333MT 
Dia280*H160 
TR‐QR280A441MT 
Dia280*H160 
Room 516, Building #38, Villa Master Office/VMO, Lane 2049 Pujin Road, Pujiang, Shanghai 201114 
SMD LED 
Color 
Single color 
252PCS 2835 
or RGB 
Single color 
333PCS 2835 
or RGB 
Single color 
441PCS 2835 
or RGB 
Trico‐Lighting    http://www.trico‐lighting.com/
Voltage 
Lumen Output 
(V AC) 
(LM) 
300 (RGB) or 
12 
1200 (6000K) 
450 (RGB) or 
12 
1700 (6000K) 
700 (RGB) or 
12 
2500 (6000K) 
Beam Angle 
Power 
Material 
(Degrees) 
(Watt) 
Glass & 
120 
18.0 
Glass & 
120 
25.0 
Glass & 
120 
40.0 
ABS 
ABS 
ABS 

Advertisement

loading
Need help?

Need help?

Do you have a question about the TR-QR280A333MT and is the answer not in the manual?

Questions and answers

Summary of Contents for Trico TR-QR280A333MT

  • Page 1 Single color  300 (RGB) or  Glass &  TR‐QR280A252MT  Dia280*H160  252PCS 2835  12  120  18.0  or RGB  1200 (6000K)  ABS  Single color  450 (RGB) or  Glass &  TR‐QR280A333MT  Dia280*H160  333PCS 2835  12  120  25.0  or RGB  1700 (6000K)  ABS  Single color  700 (RGB) or  Glass &  TR‐QR280A441MT  Dia280*H160  441PCS 2835  12  120  40.0  or RGB  2500 (6000K)  ABS  Room 516, Building #38, Villa Master Office/VMO, Lane 2049 Pujin Road, Pujiang, Shanghai 201114  Trico‐Lighting    http://www.trico‐lighting.com/...
  • Page 2 Red,  Green,  Blue,  RGB,  Slow  RGB  Gradual  Change,  Fast  RGB  Gradual  Change,  Slow  Disco  Mode,  Fast  Disco  Mode,  Party Mode (RGB Gradual Change with different speeds)    To use a remote control, the instructions will be:     Press button A and Red, Green, Blue, Yellow (red & green), Purple (red & blue), Cyan (green & blue) and White (red,  green & blue) modes will occur;  Press button B and RGB Gradual Change, Disco Mode and Party Mode (RGB Gradual Change with different speeds) will  occur;  Press button C to adjust the speed of modes under buttons A & B;  Press button D to turn on or off the lights;  Lights have memory of 5 seconds and will then reset. Remote control can be used to synchronize the lights.    II) For all White models    Simply turn the unit on or off by using your light switch.   No other special instructions.   Room 516, Building #38, Villa Master Office/VMO, Lane 2049 Pujin Road, Pujiang, Shanghai 201114  Trico‐Lighting    http://www.trico‐lighting.com/...
  • Page 3: Quick Installation Instructions

        Drawings, Dimensions & Actual Pictures      Quick Installation Instructions      Remove the two screws on the surface of the pool light as show in the picture below                         Loosen the plastic screw on where the cable goes out, and pull the cable out           Room 516, Building #38, Villa Master Office/VMO, Lane 2049 Pujin Road, Pujiang, Shanghai 201114  Trico‐Lighting    http://www.trico‐lighting.com/...
  • Page 4   Connect the PC tube (black or white) and the plastic base dismantled from above                       Put the entire plastic base with PC tube connected onto the wall of the pool; fix it by filling with concrete. Make sure the   other end of the PC tube to be pulled to the place where the power comes in while you do the fixing job, like ground or  somewhere of the wall which is subject to your actual installation needs. You may proceed when the concrete is dry    Insert the cable of the lamp body into the hole on the bottom of the plastic base, and pull it out from the PC tube                           Tighten the plastic screw on where the cable goes out until the cable can’t be pulled       Room 516, Building #38, Villa Master Office/VMO, Lane 2049 Pujin Road, Pujiang, Shanghai 201114  Trico‐Lighting    http://www.trico‐lighting.com/...
  • Page 5: Installation Remarks

                Installation Remarks  Completely shut off the power when installing or replacing lamp   The light should be installed no deeper than 500mm underwater   Lighting  test  should  be  done  underwater,  if  above  water,  make  sure  it  won’t  last  over  10  minutes  or  there  will  be   function problem or the light may be damaged  Make sure the wires are connected correctly and extra waterproofing work need to be done if the joint is underwater.   Room 516, Building #38, Villa Master Office/VMO, Lane 2049 Pujin Road, Pujiang, Shanghai 201114  Trico‐Lighting    http://www.trico‐lighting.com/...

This manual is also suitable for:

Tr-qr280a252mtTr-qr280a441mt