decina Dolce Vita Installation  & Owners Manual

decina Dolce Vita Installation & Owners Manual

Advertisement

D E C I N A I N S E T & I S L A N D S P A B A T H S
I N S T A L L A T I O N & O W N E R G U I D E
This guide is designed to provide advice on installing & using your Decina spa bath correctly, to ensure a long lasting installation.
DECINA.COM.AU
1300 DECINA

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Dolce Vita and is the answer not in the manual?

Questions and answers

Ron Harrison
June 8, 2025

Spa jets are not operating when control button pushed

1 comments:
Mr. Anderson
August 16, 2025

The spa jets may not be operating when the control button is pushed due to air not being purged from the system. The system requires the pump to start and purge air before operation. If this does not happen, the jets will not function. Ensure that the spa has water, and press the air button or ON/OFF button (depending on the model) to start the pump and purge air from the system.

This answer is automatically generated

Summary of Contents for decina Dolce Vita

  • Page 1 I N S T A L L A T I O N & O W N E R G U I D E This guide is designed to provide advice on installing & using your Decina spa bath correctly, to ensure a long lasting installation.
  • Page 2: Read Carefully

    INTRODUCTION Thank you for choosing a Decina Spa Bath and supporting an Australian owned company. Your Spa Bath has been manufactured to meet our quality assurance standards and in accordance with the Australian Standards for Spa Baths AS 3861/1991. This comprehensive installation guide is designed to clarify any necessary information about installing & owning a spa bath.
  • Page 3 BATH INSTALLATION All acrylic baths need to be supported under all rims as well as DIAGRAM A supporting the full length of the bath. NOTE DO NOT USE FOAM TO SUPPORT THE BASE OF ANY BATH. SUPPORTING THE BASE - THERE ARE 3 TYPES OF BASE SUPPORT BATHS WITH SELF SUPPORTING FEET ∙...
  • Page 4 2 x 45 degree (90 degrees) bends were possible. Use 40mm UPVC Pressure Pipe for plumbing installations. ∙ For pumps located outside to protect it from the weather ensure it is covered with a spa pump cover available from Decina. INTERNAL SPA PUMP ∙...
  • Page 5 TESTING THE SPA BATH 1. It is a Decina warranty condition to test your spa bath prior to sheeting & tiling as damage can occur during transit or installation. 2. Before enclosing the bath, ensure that no debris or other material is left in the bath as this could impair the pump.
  • Page 6 PUMP & JET OPERATING GUIDE DOLCE COMPONENTS OPERATING GUIDE SANTAI CONTOUR VITA Press the air button mounted on the rim of the spa bath, the pump will start Mod Air Button & purge the air from the system & the spa will start to operate. To stop the spa, press the air button again.
  • Page 7: Troubleshooting

    Q: WHAT ARE THE ELECTRICAL REQUIREMENTS FOR RUNNING A SPA BATH? A: Decina spa baths run on a 10 amp standard power supply and are whisper quiet generating only 65 decibels while in use. Q: WHAT BATH/SPA PRODUTCS CAN I ENJOY IN MY SPA BATH? A: You can use water soluble bath products designed for spa baths or a small amount of high quality bubble bath.
  • Page 8 If the Product has not been installed, please contact Decina for their authorised agent to inspect the Product. If the claim is accepted the Product can be returned with the Proof of Purchase (POP), to the place of purchase or Decina will arrange a collection and replacement.

This manual is also suitable for:

SantaiContour

Table of Contents