Summary of Contents for RAK Flylink Pro RAK5676-RX
- Page 1 Flylink Pro Plug& HDMI Compact Latency Play Size HDMI Interface Wireless HDMI Extender USER MANUAL This user manual applies to: Transmitter : RAK5676-TX Receiver: RAK5676-RX Version: 1.0 2018.12.24...
-
Page 3: Table Of Contents
Foreword Please read this manual carefully before you use this product and retain it properly CONTENTS for future reference - If there is any doubt or difficulty in the process of product usage, please feel free to contact us or the dealer. Foreword - The company reserves the authority to amend the specification. -
Page 4: Structure & Interface
Structure & Interface Transmitter: Receiver: RAK5676-TX RAK5676-RX Pairing Button/ Pairing Button/ Channel Switch Channel Switch LED Light Video(Blue) LED Light Video(Blue) LED Light Network(Red) LED Light Network(Red) IR In IR Out Mini USB Mini USB HDMI Out HDMI In DC IN DC IN 1. -
Page 5: The Receiver
2. Connect the power adaptor to the transmitter and receiver. Packing List Connect the IR extension connector to the IR Output socket of transmitter, and put it properly in front of IR sensor area of video Please check the packing list carefully, if any parts is missed, source;... -
Page 6: Packing List
Remarks wait for the system start, and the screen will display text” Connecting to transmitter.”then the images shows up, (1) Remote extension connector only supports 38~56KHz which means the product is working. remote’s signal protocol (2) Please make sure the transmitter and receiver are located in the effective reception distance and range,if they are located out 45°... - Page 7 Indicators Trouble Shooting Display LED Indicator Status Red light on Device Power ON Network indicator Red light slowly Remove the HDMI cable then connect it to Connecting... Transmitter is on sleeping. (RED) awake the device. twinkle Video Signal Blue light on Normal signal transmission Indicator Transmitter...
- Page 8 Attached page I: Operation Instruction 4. Connect the USB flash disk to the device to be upgraded via a USB cable, and then turn on the transmitter/receiver. for Upgrade, Code Matching and The transmitter/receiver shall automatically perform upgrade Frequency Switching Item operation when it is detected that a USB flash disk is connected during the start-up procedure.
-
Page 9: Specification
*The receiver OSD output is normal and the video output is abnormal after the transmitter and receiver are normally connected; 2. Frequency switching: When the network condition of current frequency is unsatisfactory, *The receiver OSD output is normal and the audio output is abnormal a better frequency can be selected by manually switching. -
Page 10: Indication
Attached page II: Notice Instruction 1. During normal operation process, no hot plugging of HDMI line from the transmitter and receiver is permitted; 2. Please turn on the transmitter and receiver devices after the transmitter and video source, receiver and TV are connected via HDMI connection.