Table of Contents
Advertisement
Quick Links
VEHICLE APPLICATION
Year: 2014 - 2016
Make: Polaris
Model: RZR 1000, XP4
Engine: 1000cc, Turbo (2016)
BEFORE YOU START
• Please read the entire installation manual before proceeding.
• Ensure all components listed on page 10 are present.
• If you are missing any of the components, call our customer support at (909) 947-0015.
• Do not work on the vehicle while the engine is hot.
• Make sure the engine is turned off, the vehicle is in Park and the Parking Brake is set.
WARNING:
THIS EQUIPMENT SHOULD BE INSTALLED, ADJUSTED, AND SERVICED BY PERSONNEL FAMILIAR WITH THE
CONSTRUCTION AND OPERATION OF THIS TYPE OF EQUIPMENT AND THE HAZARDS INVOLVED. FAILURE TO
OBSERVE THIS PRECAUTION COULD RESULT IN SEVERE INJURY. READ THIS MANUAL THOROUGHLY AND MAKE
SURE YOU UNDERSTAND THE PROCEDURES BEFORE YOU ATTEMPT TO OPERATE THIS EQUIPMENT. THE
PURPOSE OF THIS MANUAL IS TO PROVIDE YOU WITH INFORMATION NECESSARY TO SAFELY OPERATE,
MAINTAIN, AND TROUBLESHOOT THIS EQUIPMENT. DO NOT USE THIS EQUIPMENT FOR ANY REASON OTHER
THAN ITS INTENDED PURPOSE. FAILURE TO FOLLOW THESE INSTRUCTIONS WILL VOID ANY WARRANTY. KEEP
THIS MANUAL FOR FUTURE REFERENCE. THE INFORMATION CONTAINED IN THIS MANUAL IS SUBJECT TO
CHANGE WITHOUT NOTICE.
Product will intake and expel both air and loose materials with high force and velocity.
• Install product on roll cage, so air inlet is not blocked.
• Do not place face, hair, extremities, clothing, or other loose material in front of air inlet or outlet during use.
• Install product securely to roll cage and avoid placing hair, extremities, clothing, or other loose material in front of air inlet
during use.
Moving parts are sharp and could cause personal injury.
• Keep fan safety guard and exhaust cover in place while operating and after service.
• Disconnect product from power source before servicing.
Scavenge Fan is designed for use in conjunction with an UTV's operating manual, and state and federal law.
• Keep your seat belt fastened and wear a helmet while operating the vehicle.
Risk of electric shock!
• Improper installation, maintenance or operation could cause serious injury or property damage.
15461 Slover Ave., Fontana, CA 92337 - Phone: (909) 947-0015 - Fax: (909) 947-0603 -
INSTALLATION INSTRUCTIONS
SEE EXPLODED VIEW ON PAGE 7
Approx. Install Time: 2Hrs 00Min
TOOLS REQUIRED
• 2.5mm, 4mm, 5mm Hex Key
• 10mm Wrench/Socket
• 5/16 Nut Driver
• Phillips Screwdriver, Flat Blade Screwdriver, Razor Blade, and Wire
Cutters
THREAD LOCKER USE
We have provided a small tube of thread locker in your kit.
Whenever you see the symbol above on a step of the
instructions apply 1 small drop of the thread locker to the
threads of the screws or bolts. This will keep your
hardware from vibrating loose during rough driving. If the
hardware ever needs to be removed, do so slowly to avoid
having the inserts strip out from the plastic.
P/N: 76-2000
www.sbfilters.com
1
Advertisement
Table of Contents
Related Manuals for S&B Filters 76-2000
Summary of Contents for S&B Filters 76-2000
- Page 1 P/N: 76-2000 Approx. Install Time: 2Hrs 00Min INSTALLATION INSTRUCTIONS VEHICLE APPLICATION TOOLS REQUIRED Year: 2014 - 2016 • 2.5mm, 4mm, 5mm Hex Key • 10mm Wrench/Socket Make: Polaris • 5/16 Nut Driver Model: RZR 1000, XP4 • Phillips Screwdriver, Flat Blade Screwdriver, Razor Blade, and Wire...
- Page 2 P/N: 76-2000 INSTALLATION INSTRUCTIONS (CONTINUED) Determine where on the roll cage you want to mount the Particle Separator (A). Make sure you have enough room to fit the clamps and particle separator on the roll cage without any interference. Planning ahead will save you time and frustration during the install. Our clamps are adaptable enough to work around any additional accessories you may have on the roll cage in addition to the particle separator.
- Page 3 P/N: 76-2000 INSTALLATION INSTRUCTIONS (CONTINUED) Loosen the screw at the passenger side frog skin side cover. Lift up and pull towards the front of Place a Hose Clamp #56 over the the vehicle to remove the frog skin side cover.
- Page 4 P/N: 76-2000 INSTALLATION INSTRUCTIONS (CONTINUED) Use the provided Velcro Strap Familiarize yourself with the Wire Harness and each of the connectors. Coming from the secure the Duct to the roll cage. relay should be three branches. Connector A has the fuse holder with the red and black ring terminals for the battery.
- Page 5 P/N: 76-2000 INSTALLATION INSTRUCTIONS (CONTINUED) 1st Option, use this option if you are not comfortable tapping into the factory wire harness. We Find the Taillight Adapter provided. This will be used to tap into the wire harness assembly provide a Taillight Adapter that you can tap into instead.
- Page 6 P/N: 76-2000 INSTALLATION INSTRUCTIONS (CONTINUED) Route Connector C up the roll cage. and connect the harness into the fan connector on the Particle Separator (A). To Particle Separator To Battery Compartment Use the Cable Ties or Velcro provided to secure the wire to the roll cage.
- Page 7 P/N: 76-2000 EXPLODED VIEW 15461 Slover Ave., Fontana, CA 92337 - Phone: (909) 947-0015 - Fax: (909) 947-0603 - www.sbfilters.com...
Need help?
Do you have a question about the 76-2000 and is the answer not in the manual?
Questions and answers