(with end cap & HEX BOARD Slat) (with end cap) (M12 190 cup square hex) (M12 Nylocs) (End Caps) MCN2 90mm x 90mm (with end cap & ANGLE CUT END) pg 2 of 6 REF: CH141 - MINI CLIMBING NET...
Foundation Details SOIL (150mm) TIMBER SUPPORT POST CONCRETE pg 4 of 6 REF: CH141 - MINI CLIMBING NET...
Page 5
MCN2 timbers The top THREAD BAR (longer thread bar) attaches the NET ASSEMBLY and MCN2 timbers to the MCN1 and MCN3 ASSEMBLY MCN2 *Ensure the nylocs are covered using end caps pg 5 of 6 REF: CH141 - MINI CLIMBING NET...
Page 6
Assembly Instructions Ensure POSITIONING of the MCN2 timber is correct Additional dimensions shown below Ground Level pg 6 of 6 REF: CH141 - MINI CLIMBING NET...
Need help?
Do you have a question about the CH141 and is the answer not in the manual?
Questions and answers