Do you have a question about the PHASE and is the answer not in the manual?
Questions and answers
Summary of Contents for XLH PHASE
Page 1
Attempting to fly your XLH PHASE without PH SE w ho t completely reading the manual may cause ma c injury to yourself and people in the vicinity, as well as damage to the RC model. Please read read the Instruction Manual thoroughly before B B B taking your first flight.
- unplug immediately! - DO NOT drain the battery to the point at which you can no longer lift off. Stop using the PHASE when you begin to lose significant power.
Page 3
The farther the model goes away from you the smaller it will become and the harder it will be to determine the model’s direction. We suggest you stay at a distance between 5ft-25ft, this keeps your PHASE within a safe operational distance. XLH PHASE - Controller Functions *Familiarize yourself with the Remote and the Quadrocopter - everything should be turned off.*...
Page 4
Throttle control: Moving the stick up increases power and will result in more lift. Lowering the throttle stick or decreasing power will result in less lift. TIP: This is the same stick you will use to “sync” your quadcopter Down Rotate control: Right Left...
Page 5
- you are now in Sport Mode 3 (response rates are at 100%). This is an advanced setting and should only be used when you are comfortable flying your PHASE. Sport Mode 3 is for outdoor use. Factory setting is Standard Mode. Flip Mode: Press once and you will hear one beep - you are in Regular Mode.
Page 6
2/ Plug the USB into your computer, TV, or USB charger. The LED light on the USB will turn RED. 2/ Plug the other end of the cable into your XLH PHASE battery. Do not force the plug, it only goes in one way. The LED light on the USB will turn OFF.
Page 7
4/ Move the left control stick (this is also the throttle stick) all the way up, then all the way down. In a few seconds the blinking LED on the PHASE and the blinking LED on the controller will both be solid. The model is now bound.
Page 8
Si vous essayez d’utiliser votre XLH PHASE sans avoir lui le guide d’utilisation du début à la fin, vous risquez de vous blesser ou de blesser les gens dans les environs, ainsi que d’abîmer le modèle télécommandé. Veuillez lire le guide d’utili- B B B sation au complet avant votre premier vol.
être défectueux – débranchez-les immédiatement! - NE PAS épuiser la batterie au point où l’appareil n’est plus en mesure de décoller. Cesser d’utiliser l’appareil PHASE dès qu’il commence à perdre appréciablement de la puissance.
Page 10
Nous recommandons de faire voler le PHASE à une distance de 5 pi à 25 pi, ce qui vous permettra de le piloter sans danger.
Page 11
Commande de puissance : Haut Poussez le levier vers le haut pour augmenter la puissance et l’élévation. Poussez le levier vers le bas pour réduire la puissance et du même coup, l’élévation. CONSEIL : Utilisez aussi ce levier pour « synchroniser » le quadricoptère.
Page 12
3 (taux de réponse de 100 %). N’utilisez ce réglage sophistiqué que lorsque vous saurez parfaitement piloter votre PHASE. Le mode sport 3 est réservé à l’extérieur. Le réglage en usine correspond au mode standard.
Page 13
2/ Brancher le câble USB à un ordinateur, une télé ou un chargeur USB. La lampe DEL sur l’USB devient rouge. 3/ Brancher l’autre extrémité du câble à la batterie du PHASE de XLH. Ne pas forcer le branchement, la prise ne rentre que dans un seul sens. La lampe DEL sur l’USB s’éteint.
Page 14
4/ Déplacer le manche de commande gauche (le manche de poussée) complètement vers le haut, puis complètement vers le bas. Patienter quelques secondes. Les DEL qui clignotent sur le PHASE et sur la télécommande vont cesser de le faire. Le modèle est désormais lié.
Need help?
Do you have a question about the PHASE and is the answer not in the manual?
Questions and answers