Summary of Contents for Rack-A-Tiers 47030
- Page 1 Copper Wire Stripper JR Part # 47030 Owner’s Manual Product Specification Product Number: 47030 Replacement Blade Number: 47030B Rating: 350 rpm Stripping Capacity: 14 AWG to 4/0 AWG Dimensions: W 3” x L 7” x H 9” (inches) Weight: 4 lbs.
- Page 2 Introduction Before using this product read through this manual and make sure you have a thorough understanding of all safety and operational guidelines. This Manual includes the following: General safety rules Operation Maintenance Warranty General Safety Rules ...
- Page 3 4. Lower the blade to touch the insulation/plastic, then remove wire from shaft and turn knob 2 complete rotations. 5. Tighten drill onto the chuck of the Copper Wire Stripper JR. 6. Pull trigger on battery drill, feed wire through small wire guide. Do not tie or clamp down on the drill.
- Page 4 6. This warranty will not apply to normal deterioration of the exterior finish including but not limited to scratches, dents, paint chips, or to any corrosion or discolouring by heat, abrasive and chemical cleaners. For any questions or concerns please do not hesitate to contact Rack-A-Tiers Toll Free: 1.888.939.9991 www.rack-a-tiers.com...
Need help?
Do you have a question about the 47030 and is the answer not in the manual?
Questions and answers