XTRACK 99.729 Manual

FINGERPRINT READER
99.729 / 99.730
99.729
GENERAL WARNINGS
Mottura Serrature di Sicurezza S.p.A. thanks you for choosing this product and reminds you:
- to read these instructions very carefully before installing and using this product and before doing any maintenance.
- to keep these instructions for future use and attach the sales receipt to validate the warranty.
- in case of problems, contact your authorized dealer only.
"DO NOT use a liquid, spray, or wet cloth to clean the escutcheon! If liquids enter the scanner, they will oxidize and permanently damage
its components. Use a dry cloth only. DO NOT paint the escutcheon with any method or substance. Failure to follow these instructions will
immediately void the warranty. "
Mottura Serrature di Sicurezza S.p.A. may change the characteristics of the products described in these instructions at any time and without
notice. Always disconnect power supply before carrying out any connection/assembly operation and/or subsequent procedure.
WARRANTY TERMS
This device has been inspected by Mottura Serrature di Sicurezza S.p.A. and is guaranteed against all manufacturing defects for the period
defined by Italian law; the period begins on the date of purchase as demonstrated by the sales receipt. The warranty is effective if the sales
receipt, bearing information identifying the device, is shown to the dealer or service personnel. The warranty covers the replacement or
repair of parts found defective due to faulty manufacture; shipping costs to and from service centers are charged to the customer.
In case of a repeated malfunction of the same origin or a malfunction that cannot be repaired, Mottura Serrature di Sicurezza S.p.A. may
decide, in its final judgment, to replace the entire device. The warranty on the replacement device will continue to the expiration of the
original device. If the device must be serviced at the customer's home, the customer is required to pay (if requested) a minimum charge to
cover the transfer costs of authorized service personnel.
Transport is at the customer's risk if the customer ships the device, and at the service personnel's risk if the device is picked up and transpor-
ted by service personnel.
LIMITS OF LIABILITY
The warranty does not cover damage deriving from:
- negligence, carelessness, or use other than as described below
- failure to protect the device before doing any procedure that may generate scrap or waste (welding, drilling of panels, drilling of structure,
etc.) that prevents its correct functioning
- maintenance work not conforming to these instructions or done by unauthorized personnel
- use of accessories/components that are not original Mottura products
- shipping of the device without the necessary precautions
- any circumstances not attributable to manufacturing defects.
Operating temperature: -10°C to +55 °C.
In addition, Mottura Serrature di Sicurezza S.p.A. declines all liability for any harm to persons or damage to property deriving from failure to
comply with all of the instructions and warnings contained in this manual.
5 protection against dust
and wire contact with
dangerous parts.
4 protection against
splashing water.
99.730