3M TL20 Software Installation Manual

Temperature logger

Hide thumbs

page of 15

/ 15
Bookmarks

Quick Links

Download this manual

3M™ Temperature Logger TL20/TL25 - Software Installation Guide

Please follow this procedure to install the TL series software correctly on a personal computer (PC).

You have the choice to download the software from the 3M website free of charge or from

the 3M temperature logger CD available from 3M.

Rev 2007-05-04

• The CD contains three folders:

• Installer for the Spanish and English version

• Installer for the French and English version

• Document folder with Instruction Sheets in 8

languages and Product Fliers in 3 languages

• Install software by clicking one of two installer file:

"3M_TempLogger_4_06_Setup_Esp_Eng.exe"

"3M_TempLogger_4_06_Setup_Frc_Eng.exe"

Please do not connect the USB cable

before installing the 3M TL series

software.

• After the installation of the software is complete,

connect the USB cable to one of the USB port

available in the PC.

Summary of Contents for 3M TL20

Page 1 Please follow this procedure to install the TL series software correctly on a personal computer (PC). You have the choice to download the software from the 3M website free of charge or from the 3M temperature logger CD available from 3M.
Page 2 3M™ Temperature Logger TL20/TL25 - Software Installation • Proceed with the software installation as indicated on the following screens. • Check “I Accept” and click “Next”. • When the installation is completed, the shortcut icon “3M Temperature 3M Temperature Logger.lnk Logger”...
Page 10 3M™ Temperature Logger TL20/TL25 - Hardware Installation Select the option: “Yes, I have already connected the hardware” and click Next to complete the Hardware installation process. • Scroll and check if the “Kooner USB Device” is already installed. • If yes, select it and click on it.
Page 11 • Click “Continue Anyway” or “Stop Installation”. • The Temperature Logger software is designed to work with your PC. However, 3M is not familiar with the specific configuration of your computer system, the other programs you are running, and how this may impact the operation of your computer.
Page 12 USB port and in the TL20 opening as shown in the pictures below. • The PC will recognize that a new hardware is connected to the USB port and will open the Windows Hardware Wizard to perform the installation of the USB driver.
Page 13 Pressing the “Check” button: red light indicates that is functioning OK and all data points are within the set TL20 is functioning OK and at least one data point is temperature limits outside the set temperature limits Rev 2007-05-04 © 3M 2007 – All Rights Reserved...
Page 14 If the TL software in the PC does not communicate with the TL20, please check the following: • Push the “Wake Up” button on the TL20/TL25 again and check that both the red and green LED are blinking five times.

This manual is also suitable for:

Tl25