Aux - Philips FW306/22 User Manual

TAPE
Tape Playback
1 Press TAPE to select TAPE mode.
™ "TAPE" will be displayed.
2 Load the tape into the selected tape
deck.
3 Press PLAY É to start playback.
• To interrupt playback, press PAUSE.
• To resume playback, press PAUSE
again.
4 Press STOP•OPEN to end playback.
Rewind/Fast Forward
At the stop mode
1 You can rewind or fast forward a tape
by pressing à or á respectively.
™ The tape will stop automatically at
the end of rewinding or fast
forwarding.
2 Press STOP•OPEN to stop rewinding or
fast forwarding.
Continuous Playback From
Tape Deck 2 to Tape Deck 1
1 Press TAPE to select TAPE mode.
2 Load the tapes in tape deck 1 and 2.
3 Press PLAY 2 on tape deck 2.
4 Press PAUSE on tape deck 1.
5 Press PLAY 2 on tape deck 1.
™ Playback will begin with tape deck 2
and will continue with tape deck 1
when playback on tape deck 2 ends.
6 Press STOP•OPEN if you want to stop
playback before the end of the tape in
tape deck 1 or tape deck 2.
Notes:
– During rewinding or fast forwarding of a
tape, it is also possible to select another
source mode (e.g. CD, TUNER or AUX
mode).
– Check and tighten slack tape before use
with a pencil. Slack tape may get
jammed or may burst in the mechanism.
– C-120 tape is extremely thin and is
easily deformed or damaged. It is not
recommended for use in this system.
– Store the tapes at room temperature
and do not put them too close to a
magnetic field (for example, a
transformer, TV or loudspeaker boxes).

AUX

STEREO REC DBB
I S
NEWS HSD
REPLAY FM MW AM CLOCK
LW PM MAX
TIMER
REPEAT SHUFFLE
PROGRAMTIMER
FW 318C
TUNER TAPE AUX
BAND TAPE 1 • 2 VIDEO
Selecting External Equipment
If you have connected the audio out
terminals of the external equipment (TV,
VCR, Laser Disc or DVD player) to the AUX
IN terminals, you can hear the enhanced
sound from the system.
• Press AUX to select the external mode.
™ "AUX" will be displayed.
Note:
– All the sound control features (e.g. DSC,
DBB, etc.) are available for selection.
PROGRA
15