Related Manuals for IEI Technology POCm-DOCKING-6BAY
Summary of Contents for IEI Technology POCm-DOCKING-6BAY
- Page 1 POCm-DOCKING-6BAY MODEL: POCm-DOCKING-6BAY 6-Bay Smart Charging Docking Station with Fast Charging Capability and 255W PSU User Manual User Manual Page I Rev. 1.00 - October 9, 2019...
- Page 2 POCm-DOCKING-6BAY Revision Date Version Changes October 9, 2019 1.00 Initial release Page II...
- Page 3 POCm-DOCKING-6BAY Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
- Page 4 POCm-DOCKING-6BAY Manual Conventions WARNING Warnings appear where overlooked details may cause damage to the equipment or result in personal injury. Warnings should be taken seriously. CAUTION Cautionary messages should be heeded to help reduce the chance of losing data or damaging the product.
-
Page 5: Table Of Contents
POCm-DOCKING-6BAY Table of Contents 1 INTRODUCTION ......................1 1.1 O ........................2 VERVIEW 1.2 F ........................2 EATURES 1.3 F ........................ 3 RONT 1.4 R ......................... 4 1.5 S ......................4 PECIFICATIONS 1.6 D ....................... 5 IMENSIONS 2 UNPACKING ......................... 6 2.1 U... - Page 6 POCm-DOCKING-6BAY List of Figures Figure 1-1: POCm-DOCKING-6BAY ....................2 Figure 1-2: Front Side........................3 Figure 1-3: Rear Side ........................4 Figure 1-4: POCm-DOCKING-6BAY Dimensions (mm) ............... 5 Figure 3-1: Battery Charging ....................... 12 Page VI...
- Page 7 POCm-DOCKING-6BAY List of Tables Table 1-1: LED Indicators ......................3 Table 1-2: Specifications ....................... 5 Page VII...
-
Page 9: Introduction
POCm-DOCKING-6BAY Chapter Introduction Page 1... -
Page 10: Overview
POCm-DOCKING-6BAY 1.1 Overview Figure 1-1: POCm-DOCKING-6BAY The POCm-DOCKING-6BAY is a 6-bay docking station designed for charging the batteries of the POCm-W22C/W24C-ULT3 series medical panel PC. 1.2 Features The POCm-DOCKING-6BAY features are listed below: Unique 6-bay design for battery charging ... -
Page 11: Front Side
POCm-DOCKING-6BAY 1.3 Front Side The front side of the POCm-DOCKING-6BAY is shown below (Figure 1-2). Figure 1-2: Front Side The descriptions of each LED indicator are listed below. Battery State LED Indicator Description Good Battery Charging: solid red Fully charged: solid green... -
Page 12: Rear Side
POCm-DOCKING-6BAY 1.4 Rear Side The rear side of the POCm-DOCKING-6BAY is shown below (Figure 1-3). Figure 1-3: Rear Side 1.5 Specifications The technical specifications for the POCm-DOCKING-6BAY are listed below. POCm-DOCKING-6BAY Battery Bay TC-202 (7800mAh) Battery Maximum charge voltage: 12.6 V Maximum charge current: 2.2 A/ bay... -
Page 13: Dimensions
Operating Temperature 0°C ~40°C (32°F~104°F) -20°C ~60°C (-4°F~140°F) Storage Temperature 20%~90%, non-condensing Operating Humidity 10%~95%, non-condensing Storage Humidity NCT metal housing Chassis Construction Table 1-2: Specifications 1.6 Dimensions The POCm-DOCKING-6BAY dimensions are shown below. Figure 1-4: POCm-DOCKING-6BAY Dimensions (mm) Page 5... -
Page 14: Unpacking
POCm-DOCKING-6BAY Chapter Unpacking Page 6... -
Page 15: Unpacking
POCm-DOCKING-6BAY 2.1 Unpacking To unpack the docking station, follow the steps below: Step 1: Use box cutters, a knife or a sharp pair of scissors that seals the top side of the external (second) box. Step 2: Open the external (second) box. -
Page 16: Packing List
Contact the IEI reseller or vendor the POCm-DOCKING-6BAY was purchased from or contact an IEI sales representative directly by sending an email to sales@ieiworld.com. The POCm-DOCKING-6BAY docking station is shipped with the following components: Quantity Item... -
Page 17: Installation
POCm-DOCKING-6BAY Chapter Installation Page 9... -
Page 18: Safety Precautions
Make sure the power is turned off and the power cord is disconnected whenever the POCm-DOCKING-6BAY is being installed, moved or modified. Do not apply voltage levels that exceed the specified voltage range. Doing so may cause fire and/or an electrical shock. Use a power cord that matches the voltage of the power outlet, which has been approved and complies with the safety standard of your particular country. -
Page 19: Installation Precautions
The POCm-DOCKING-6BAY docking station is designed to charge the batteries of the POCm-W22C/W24C-ULT3 system. Do not insert other type of battery into the slots of the POCm-DOCKING-6BAY. Doing so may cause damage to the battery and the docking station. -
Page 20: Figure 3-1: Battery Charging
POCm-DOCKING-6BAY Step 3: Turn on the docking station by using the power switch on the rear panel. The power LED on the front panel lights up in orange. Step 4: Insert a battery into a battery bay as shown below. The LED indicator lights on in red indicating the battery is being charged. -
Page 21: A Regulatory Compliance
POCm-DOCKING-6BAY Appendix Regulatory Compliance Page 13... - Page 22 POCm-DOCKING-6BAY DECLARATION OF CONFORMITY This equipment has been tested and found to comply with specifications for CE marking. If the user modifies and/or installs other devices in the equipment, the CE conformity declaration may no longer apply. FCC WARNING This equipment complies with Part 15 of the FCC Rules. Operation is subject to the...
-
Page 23: B Product Disposal
POCm-DOCKING-6BAY Appendix Product Disposal Page 15... - Page 24 POCm-DOCKING-6BAY CAUTION: Risk of explosion if battery is replaced by an incorrect type. Only certified engineers should replace the on-board battery. Dispose of used batteries according to instructions and local regulations. Outside the European Union - If you wish to dispose of used electrical and ...
-
Page 25: C Maintenance And Cleaning Precautions
POCm-DOCKING-6BAY Appendix Maintenance and Cleaning Precautions Page 17... -
Page 26: Maintenance And Cleaning
Harsh chemicals may cause damage to the chassis. Thinner Spray-type cleaner, Benzene, Wax, Abrasive cleaner, Acid or Alkaline solvent. C.1.1 Maintenance and Cleaning Prior to cleaning any part or component of the POCm-DOCKING-6BAY, please read the details below. To clean the POCm-DOCKING-6BAY, ... -
Page 27: Cleaning Tools
POCm-DOCKING-6BAY C.1.2 Cleaning Tools Some components in the POCm-DOCKING-6BAY may only be cleaned using a product specifically designed for the purpose. In such case, the product will be explicitly mentioned in the cleaning tips. Below is a list of items to use when cleaning the POCm-DOCKING-6BAY. -
Page 28: D Symbol Definitions
POCm-DOCKING-6BAY Appendix Symbol Definitions Page 20... - Page 29 POCm-DOCKING-6BAY The following symbols appear on the product, its labeling, or the product packing. Each symbol carries a special definition, as defined below: Direct current Fragile, handle with care This side up Keep dry Consult the operating Refer to instruction manual...
-
Page 30: E Hazardous Materials Disclosure
POCm-DOCKING-6BAY Appendix Hazardous Materials Disclosure Page 22... - Page 31 POCm-DOCKING-6BAY The details provided in this appendix are to ensure that the product is compliant with the Peoples Republic of China (China) RoHS standards. The table below acknowledges the presences of small quantities of certain materials in the product, and is applicable to China RoHS only.
- Page 32 POCm-DOCKING-6BAY 此附件旨在确保本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符 合中国 RoHS 标准规定的限量要求。 本产品上会附有”环境友好使用期限”的标签，此期限是估算这些物质”不会有泄漏或突变”的 年限。本产品可能包含有较短的环境友好使用期限的可替换元件，像是电池或灯管，这些元 件将会单独标示出来。 部件名称 有毒有害物质或元素 铅 汞 镉 六价铬 多溴联苯 多溴二苯 (Pb) (Hg) (Cd) (CR(VI)) (PBB) 醚 (PBDE) 壳体 显示 印刷电路板 金属螺帽 电缆组装 风扇组装 电力供应组装 电池 O: 表示该有毒有害物质在该部件所有物质材料中的含量均在 SJ/T 11363-2006 (现由 GB/T 26572-2011 取代) 标准规定的限量要求以下。...