Philips FW-C85/37 User Manual page 15

15
• Repeat step 3 - 4 to select the
desired mid and high frequencies
Spectrum Analyzer band levels.
5 You can choose to edit the name for
the personal setting.
™ The first character of setting name
will be flashing.
6 Adjust the JOG to select the desired
alphabet, number or symbol.
™ "A to Z", "0 to 9" or "*, -, +, \, /, _".
7 Press á to confirm the selection.
™ The next character for editing will
be flashing.
• Repeat step 6 - 7 to store up to 10
characters.
8 To store the setting, press
PERSONAL again.
• Before storing the setting, you
can press à to retrace the steps
in the reverse order.
• To exit without storing the
setting, press Ç.
Notes:
– During personal setting, if no button is
pressed within 90 seconds, the system
will exit personal setting mode
automatically.
– wOOx level cannot be stored as part
of the personal setting.
– It is not possible to adjust Bass/Treble
level during personal setting, "USE
JOG" will be displayed.
pg 01-28/C85/37-Eng
OPERATING THE SYSTEM
DIGITAL SOUND CONTROL
(DSC)
The DSC feature enables you to adjust
the system to suit your type of music.
1 Press to select the DSC feature.
2 Adjust the JOG to select the desired
Digital Sound Control setting :
OPTIMAL, CLASSIC, TECHNO,
VOCAL, ROCK or JAZZ.
™ The selected digital sound is
encircled.
™ "OPTIMAL, CLASSIC, TECHNO,
VOCAL, ROCK or JAZZ" will be
displayed.
Note:
– For neutral setting, select CLASSIC.
VIRTUAL ENVIRONMENT
CONTROL (VEC)
The VEC feature enables you to adjust
the system to select a type of
environment.
1 Press to select the VEC feature.
2 Adjust the JOG to select the desired
Virtual Environment Control setting :
HALL, CLUB, DISCO, CINEMA,
CONCERT or ARCADE.
™ The selected environment is
encircled.
™ "HALL, CLUB, DISCO, CINEMA,
CONCERT or ARCADE" will be
displayed.
15
BASS/TREBLE
The BASS/TREBLE features enable you
to define the sound processor settings
for Bass and Treble.
1 Press to select the BASS/TREBLE
feature.
™ The BASS and TREBLE LED will
be lit.
™ "ADAPT BASS AND TREBLE
LEVELS" will be displayed.
2 Use BASS/TREBLE CONTROL to
select the desired BASS or TREBLE
level respectively.
™ The BASS/TREBLE level will
increase or decrease between
level +3 and -3.
• Press BASS 3 or 4 to select the
low tone level.
™ "BASS -X or BASS +X" will be
displayed.
• Press TREBLE 3 or 4 to select the
high tone level.
™ "TREBLE -X or TREBLE +X"
will be displayed.
Note:
– "X" denotes the sound level.
wOOx
There are three wOOx settings to
enhance the bass response.
1 Press wOOx PLUS (or wOOx on
the remote control) to select between
normal or enhanced wOOx effect.
2/16/00, 9:03 AM
• When normal wOOx sound effect is
selected;
™ The OO display is switched
W X
off.
™ "WOOX NORM" will be displayed.
• When enhanced wOOx sound
effect is selected;
™ The
OO appears on the
W X
display.
2 Adjust wOOx LEVEL to select the
desired levels of wOOx.
™ The OO display lights up.
W X
™ "WOOX 1, WOOX 2 or WOOX 3"
will be displayed.
Notes:
– When Personal or Bass/Treble sound
control is selected, wOOx will be
switched off automatically.
– Some CDs or tapes might be recorded
in high modulation. It may cause
distortion at high volume. If this occurs,
switch off wOOx or reduce the volume.
Automatic DSC-wOOx /
VEC-wOOx selection
The best wOOx setting is generated
automatically for each DSC or VEC
selection. You can manually select the
wOOx setting that best suits your listening
environment.
3139 116 19591 (ENG)