Deco Lighting D464-L Installation Instructions

INSTALLATION INSTRUCTIONS
1. Read carefully before installing fixture. Retain for future reference.
2. Failure to follow instructions may result in serious injury or death.
3. Upon receipt the fixture, thoroughly inspect for any freight damage which should be brought to the attention of
the delivery carrier. Compare the catalog description listed on the package slip with the fixture label on the housing to
assure you have received material.
4. This fixture must be wired in accordance with the international electrical code and applicable local codes and
ordinances. Proper grounding is required to insure personal safety. Carefully observe the correct grounding procedure
under installation section.
5. DECO luminaires may be damaged if connected to conduit systems containing water - Article 300-5G of National
Electric Code requires that "Conduits or raceways through which moisture may contact energized live parts shall be
sealed or plugged at either or both ends".
*Deco Lighting assumes no responsibility for claims arising out of improper or careless handling or installation of this product.

INSTALLATION

1. Remove screws and take plate off from the fixture and fasten it to the wall.
Deco Lighting practices a program of continuous product improvement, and as a result product specifications change frequently. We reserve the right to change
product specifications without notice. Contact Deco for the latest product information.
2917 Vail Ave.Commerce, CA 90040
Modern Full Cutoff LED Wall Pack

IMPORTANT SAFETY INSTRUCTIONS

To prevent electrical shock, turn off electricity at fuse box before proceeding.
800-613-3326 info@getdeco.com
• •
D464-L
www.getdeco.com
•
1