Table of Contents
Advertisement
WARNING! Under no circumstances should you try to repair the system yourself. This will invalidate the warranty. Do
not open the system due to a risk of electric shock.
If you are having problems with your product, check this list of problems and possible solutions before requesting service. You
may be able to solve the problem yourself.
"NO DISC" appears.
•
Insert a disc.
•
Inspect disc for scratches and to make sure it is loaded correctly.
•
Wait until moisture has cleared from the lens.
"DISC NOT FINALIZED" appears.
•
Use a finalized CD-R(W) or CD-R.
Poor radio Reception.
•
Adjust the antenna or connect an external antenna for better reception.
•
Increase the distance between the System and other sources of electronic interference like a TV, VCR, or DVD player.
•
Make sure the AC outlet has power by trying another appliance in the same outlet.
Tape recording cannot be made.
•
Place a piece of tape over the missing tab space on the cassette.
Tape will not playback.
•
Use only NORMAL (IEC 1) tape.
•
Clean the deck parts. See page 5 .
Deck door does not open.
•
Unplug the system for a moment.
The system does not respond.
•
Unplug the system for a moment.
There is no sound.
•
Adust the volume.
•
Disconnect the headphones.
•
Check the speaker connections.
The left and right outputs are reversed.
•
Check speaker connections and location.
Remote Control does no work properly.
•
Select the correct source (CD, TUNER, TAPE, AUX) before pressing a button.
•
Move the remote closer to the system.
•
Check the batteries for correct polarity.
•
Replace the batteries.
•
Make sure the front of the remote control is pointed at the system.
The timer is not working.
•
Set the clock properly.
•
Press TIMER ON/OFF to activate the timer.
•
If you are recording, the timer will not interrupt the recording process.
Some lights are not lighting up.
•
Press DISPLAY and select NORMAL or DISPLAY 1 mode.
The Clock/Timer setting is deleted.
•
The power supply has been interrupted. Reset the clock and timer.
The system display and buttons start randomly flashing.
The system is in DEMO mode. Press and hold STOP 7 until the demo stops.
•
Helpful Hints 27
Advertisement
Table of Contents
