Ranch Hand FSF201BL1 Installation Instructions page 2

9. Center the frontend from side to side and raise or lower the frontend as needed.
10. 2017-19 models: Mount the Adaptive Cruise Control Module to the Adaptive Cruise Bracket
(FSF15HACBBL) provided. Use the ¼" x 1 ½" bolts provided. Use the four plastic spacers between the
adaptive cruise bracket and the rectangle plastic cover. Mount the bracket to the angle iron that is located
on the underside of the top plate with 5/16" bolts. The A.C.C. module will face forwards.
11. 2020-up models: Mount the Adaptive Cruise Control Module to the Adaptive Cruise Bracket
(FBF18HACBBL for 2020-up models). Use the ¼" x 1" bolts provided. Mount the bracket to the front
side of the angle iron that is located on the underside of the top plate with 5/16" bolts. The A.C.C.
module will face forwards.
MAKE SURE ALL NUTS AND BOLTS ARE TIGHT!