Download Print this page

Bestop HOSS 42804 Installation Instructions Manual page 5

Hardtop cart

Advertisement

HOSS
Top Cart Installation Instructions
Four or more people are required
to lift the hardtop safely.
Removing your Hardtop
Release the hard top from the vehicle, but leave
it in place. A T40 Torx Wrench has been provided
in the parts kit for this purpose. Place the Top
Cart against the rear of the top with the Rear Strut
toward the top.
Make sure that the Right and Left Corner Hooks
on the cart line up to support the rear fl ange of the
hardtop.
Let the top rest on the vehicle.
Removing your Hardtop
Orient the Top Cart Strap with the buckle in
the middle of the strap facing up. Thread the
straight end of the strap between the hard top
and the Rear Strut in the space between the
two Foam Sleeves.
If you have a one piece top, take the hook end
of the strap up and hook it to the front edge of
the top.
If you have a two piece top, wrap the strap
around the front edge and back to hook it to
the upper inside lip of the rear window.
Do not twist the strap.
Rev. F 0913
Hook to front
of Top
One Piece Top
Strap under
Rear Strut
Hook to lip above
rear window
Two Piece Top
Hard Top
Top Flange should
be supported by
Corner Hook
Wrap Strap
around front
Strap under
Rear Strut
Top Cart
42804 pg. 5

Advertisement

loading