Advertisement
Quick Links
Advertisement
Summary of Contents for Illuco IDS Series
- Page 1 IDS-1000 / IDS-1000 Plus Dermatoscope...
- Page 2 ILLUCO IDS-1000 Series (IDS-1000/IDS-1000 Plus) Please read the instruction carefully prior to use the device and keep them in the safe place for future reference. IDS-1000 and IDS-1000 Plus models are designed exclusively for external examination. United States Federal Law restricts this device to sale by or on the order of a physician.
- Page 3 Do not look directly at LED light The IDS-1000 Plus is a magnet embedded device. Do not use the device near magnetic susceptible devices. When quick heating the room, the IDS-1000/plus can be vapored inside. Do not use the device before the vapor is naturally eliminated. Direction for use Hold the IDS-1000/Plus and place it on the lesion.
- Page 4 Specifications IDS-1000 Polarization Cross & Parallel Aperture 18mm Magnification 10 x Depth of field Resolution 95 LP 8 White LEDs Focus Mode Fixed Battery Disposable Lithium 6V 2CR5 Continuous duty time 8 hours Camera & Smartphone Compatibility Contact & Non-Contact Yes (Detachable protect glass) Examination Net Dimensions / Weight...
- Page 5 Product Composition <Non contactor> <Battery> Non Contactor N : Non-Polarization mode P : Polarization mode Power button Low batt indicator Battery cover Magnet ring (Only applied on IDS-1000 Plus) Battery IDS-1000/plus are using a 2CR5 lithium battery. Please replace the battery when the indicator flashes red twice. After blinking the red light, the device will turn off automatically.
- Page 6 Maintenance Note The lenses and polarization filters installed on the IDS-1000 must be treated as high quality optical parts. Use only a standard lens cleaning equipment for cleaning and protect them from harmful chemicals. -Exterior cleaning The exterior of the IDS-1000 may be cleaned or sterilized with isopropyl alcohol (70% vol.) Do not use any kind of disinfectants, acetone or chemicals other than isopropyl alcohol.
- Page 7 No power supply Replace the battery with a new one. If the try ended up with failure, contact ILLUCO A/S center or your local distributor and report the problem. LED fails The LEDs embedded on the IDS-1000/plus are designed to last 100,000 hours.
- Page 8 Warranty Policy ILLUCO Corporation Ltd, hereby warrants that IDS-1000 purchased directly from ILLUCO corporation Ltd. Headquartered in Gunpo, South Korea, will be free factory defects in material and workmanship for the period of time stated below, subject to certain limitations.
- Page 9 Under this warranty, the customer’s responsibility shall be to: a. Operate and maintain the device as specified in the instructions manual. b. Give notice to authorized distributor or ILLUCO of apparent defects within seven (7) days after discovery. c. Provide proof of purchase, purchase date and serial number of the warranty items.