Cautions; About Laser Light; High Temperature; Routine Maintenance - Vava VA-LT002 User Manual

Bluetooth Out Yes (Connect with Bluetooth speaker)
DTS Yes
Dolby Audio Yes
Interfaces
HDMI 3 ports (HDCP2.2, 1 with ARC)
USB 1 (5V DC, 500mA)
Video In AV3.5
Audio Out Line out 1 (3.5mm) and S/PDIF 1
RJ45 1
Connectivity
Internet Wired and wireless (802.11ac 2.4G / 5G 2T2R, with DFS)
Bluetooth BT4.2 (dual mode)
Power
Input 100-240V AC, 50/60Hz, 4A
Power Consumption <360W
Standby Power Consumption <0.5W
Others
Dimensions 533 x 368 x 107mm / 21.0 x 14.5 x 4.2in
Weight 10.8kg / 381oz
Noise <32dB
Working Temperature 0 - 40°C / 32 - 104°F
Storage Temperature -20 - 65°C / -4 - 149°F
Accessory
Remote Bluetooth
Power Cord 1.5m
AAA Battery 2

CAUTIONS

1. ABOUT LASER LIGHT

・ Never look into the projector lens when the laser is turned on; the bright light can
damage your eyes.
・ Do not try to dismantle or modify the projector. It contains a high-power laser
component and serious injury could result.
・ Do not allow small children to operate the projector. They must be accompanied by an
adult for use.

2. HIGH TEMPERATURE

・ Do not place anything that can become warped or damaged by heat near the vents.
・ Do not bring your hands or face close to the vents while projection is in progress.
・ Do not place flammable materials such as aerosols near the device in case of fire.

3. ROUTINE MAINTENANCE

・ Please wipe clean the shell and top cover of the projector routinely with the cleaning
cloth equipped or others for professional use. Do not apply abrasive detergent,
solvent or other coarse chemicals to avoid scrapes. Before cleaning, unplug the power
cord from the socket.
・ Leave plenty of space around the vents for heat dissipation.
・ Do not place anything blocking the speaker for better sound.
・ Dismantling the device will not only fail the warranty but may also cause harm to your
or others' safety.
・ Do not use the projector near water, sources of heat, high-voltage electrical wires, or
sources of magnetic fields.
・ If you use the projector in a country other than where you purchased it, use the
correct power cord for that country.
・ Do not block the lens during projection using a book or any other object. This could
damage the projector or cause a fire.
・ Remove the battery from the remote control for long idle time in case of leakage and
damage to the remote.
・ Please follow local regulations to promptly and properly dispose of used batteries.
21/22