Ditanium Vapor All-In-One Enail and Vaporizer Instructions

TAN
UM
VAPOR®
All-In-One Enails and Vaporizers
Thank you for purchasing a genuine
Ditanium Vapor®
all-in-one enail and vaporizer! We cut and assemble our units in the USA by hand, taking great
pride in our craftsmanship. (Small variations and minor burning with the wood can occur from the manufacturing process.) Quality and customer
satisfaction always come first with our company. Contact us at jnfoPenailvaporizer,corn with any questions or issues you might have. Please enjoy
your new vaporizer responsibly after reading the instructions below.
WARNING: RISK OF FIRE AND SEVERE BURNS. PLEASE USE CAUTION. -
This unit contains a ceramic heating element that will reach very
high
temperatures rapidly.
Never touch any of the hot surfaces of titanium, quartz, or glass.
The LED light can burn out over time and should not be
relied upon as a power indicator. Always proceed with extreme caution even when the light is off. Allow up to 30 minutes for the components to cool
to a safe temperature once the vaporizer is turned off. Severe burns, personal injury, and fire and property damage can occur if these warnings are
ignored.
Ditanium Vapor®
all-in-one enails and vaporizers are only for use by adults at least 21 years of age.
• DO NOT
attach the handpiece before the vaporizer is at operating temperature. The titanium heater can expand and cause the handpiece to
get stuck or the glass to break. If this occurs, allow the unit to fully cool and the handpiece can safely be removed.
• DO NOT
attempt to use the vaporizer without a firm understanding of how to safely operate.
• DO NOT
use if any component is missing or damaged in anyway and never attempt to repair the vaporizer unit
• DO NOT invert the unit upside down while on.
•
DO NOT
place any items on top of the vaporizer box or place vaporizer near any flammable objects.
• DO NOT
leave the optional titanium handpiece or carb-cap attached to heater cover for longer than 30 seconds at time.
• ALWAYS
place the handpiece on a fire and temperature resistant surface after using.
• DO NOT
leave the vaporizer within access of children or pets as any contact with the hot components can result in severe burns.
• DO NOT leave the vaporizer on unattended.
•
DO NOT use the vaporizer near water or a water source as there is risk of electric shock.
• DO NOT use this product if you are pregnant or nursing.
Please follow all instructions carefully and contact us at info@enailvaporizer.com with any questions or issues. We are here to help!
Quick Instructions: VAPORIZING HERB
• For vaporizing herb, turn the dimmer switch to about the 6 o'clock position.
•
Pack the handpiece with about 1/4 to 1/2 "of herbal material.
• Connect the handpiece to the heater cover (once at operating temperature) and inhale.
• Stir the herbal contents between pulls for more vapor.
•
Expel herbal material into a fireproof container after use.
Quick Instructions: LIQUIDS or EXTRACTS
•
For vaporizing liquids or extracts, the dimmer switch can be turned all the way up. The optional carb cap allows for lower temperature
use.
•
Connect the handpiece to the heater cover (once at operating temperature).
•
Place a small amount of material into the recessed dish area of the quartz and inhale simultaneously.
•
If using the optional carb cap, place it over the heater cover after applying the liquid or extract and partially cover the carb hole with your
finger to allow limited airflow. (The carb cap allows the user to take lower temperature pulls and still completely vaporize the material.)
INITIAL OPERATING INSTRUCTIONS- MUST READ FOR SAFE USE
Remove all packing materials before plugging and powering on the vaporizer. The heater cover needs to be free of all debris before any heat is
applied. Plug in the unit to an appropriate power source. Place in a safe area where it will not be disturbed. Allow the unit to preheat for at least 25
minutes at full temperature before inhaling from the pieces. Turn the dimmer switch all the way clockwise. This will allow the ceramic heater to reach
full temperature and burn off any residual from the manufacturing process. The titanium and quartz heater covers will oxidize with temperature and
whiten in color overtime. This is completely normal and an unavoidable reality of heating titanium or quartz to high temperatures. The optional
titanium handpiece should not oxidize unless it is left on the heater cover for more than 30 seconds at a time. Titanium will turn bronze, purple, and
then whiten when heated repeatedly.
HEATER COVER- Ditanium Vapor®
's heater cover design, US Patent
009814270B2, can be taken apart for cleaning or to replace the quartz
nail. The cover consists of three pieces that screw together to fasten
tightly. The covers may become lose if they are rotated counter clockwise
and can easily be tightened by turning the parts clockwise. The ribs on
piece 3 should be held to align the cover to the center of the opening so
the parts remain fastened tightly.
To remove:
First unscrew piece 1. Next unscrew piece 2 by holding the
ribs piece 3. Now the quartz nail can be removed.
To assemble:
First position the quartz nail over piece 3. Next screw on
piece 2 firmly by holding the ribs on piece 3. Finally screw on piece 1.
1