Removing Collected Water; Removing Collected Water With Continuous Draining - Insignia NS-DH20WH1-C User Manual

Setting the Auto Start timer
Press TIMER until the On indicator LED turns on.
1
Press and hold the
2
dehumidifier will automatically turn on, then wait for the LED display to return
to its previous state. The setting is saved.
Note: The or
or buttons increment by 1 hour up to 24 hours.
Setting the Auto Stop timer
Press TIMER until the Off indicator LED turns on.
1
Press and hold the
2
dehumidifier will automatically turn off, then wait for the LED display to return
to its previous state. The setting is saved.
Notes:
• The or
buttons increment by 1 hour up to 24 hours.

Removing collected water

When the Full indicator lights, remove the tank from your dehumidifier.
1
Pour the water out, then reinsert the tank into your dehumidifier.
2
Notes:
• When the tank is full, your dehumidifier automatically turns off and the Full indicator
lights.
• Your dehumidifier will automatically restart when the tank is back in place.
• If you remove the tank while your dehumidifier is running, the LED display shows "P2"
and your dehumidifier stops running.

Removing collected water with continuous draining

Remove the plastic cover from the continuous drain hose outlet.
1
Screw a 5/16" drain hose (not included) onto the female threaded end of the
2
continuous drain hose outlet.
Continuous drain
hose outlet
Direct the hose towards a floor drain.
3
Note: Make sure there are no kinks in the hose, as they may stop collected water from
draining.
10
NS-DH20WH1-C/NS-DH35WH1/NS-DH35WH1-C/NS-DH50WH1
or buttons to select the number of hours before your
buttons increment by 0.5 hours up to 10 hours. After you reach 10, the
or buttons to select the number of hours before your
buttons increment by 0.5 hours up to 10 hours. After you reach 10, the
www.insigniaproducts.com
Female threaded end
Water hose
or