Brazel's RV Performance UltraTrac UTF53V8R Instructions

Each installation may vary due to chassis manufacturing options and variations in design. The rod assembly
may be installed in several different combinations, such as either front or rear of the supplied brackets as well
as using different bracket holes. The important thing is to maintain clearance between your UltraTrac and any
chassis component (moving and stationary) such as exhaust, vehicle frame, differential, or any other item
which might interfere with the operation of this product. Pictures and diagrams may not represent the best
installation for every application.

Torque in Foot-Pounds for Inch Bolts

Bolt Size Grade 5
1/4"
5/16"
3/8"
7/16"
1/2"
5/8"
3/4"

Torque in Foot-Pounds for Metric Bolts

Bolt Size Grade 8.8
6MM
8MM
10MM
12MM
14MM
16MM
18MM
•
the installation of this product.
• If the vehicle is equipped with air bags be sure that nothing interferes with the deployment of them.
• Be sure to use Loctite
be found then use the torque charts provided.
• Dealer or installer be certain the user receives these instruction sheets.
Grade 8
10 14
19 29
33 47
54 78
78 119
154 230
257 380
Grade 10.9
6 8
16 22
31 40
54 70
89 117
161 230
222 318
® Red on all bolts before tightening. Tighten all bolts according to the torque charts
UTF53V8R Instructions
Ford F-53 – 14,000, 16,000 & 18,000 GVW
Motor Home Chassis Rear Bar

Torque in Foot-Pounds for Grade 5 U-Bolts

Bolt Size
3/8"
7/16"
1/2"
5/8"
3/4"
7/8"
1
3

NOTICE

Page 1 of 3
Fine Course
21 18
33 29
52 45
107 91
190 165
304 270
*Always tighten and
4
torque u-bolts in a cross
pattern sequence.
2