Advertisement
press "CF/+" "ADD/-" buttons to choose the desired Sensitivity level (range
from 0-10). After choosing of the level, press "RESET/AUTO" button to con rm.
Size Detection function
available for the models with UV detection or the model with both UV and
MG/MT detection.
• Used to check size of notes
• By default, serving as a supplementary function, the detection can be activated
when the unit is powered up.
• If the machine detects di erent size note when counting, it will stop and emit
beeping sound, while the batch display will show the message "d4" (alerting
the user the of the presence of a di erent size). The note will always be the
last one on the stacker. Remove the dubious bill, press RESET/AUTO button
to continue.
Half-note Detection
available for the models with UV detection or the model with both UV and
MG/MT detection.
• Used to check half-note.
• By default, serving as a supplementary function, the half-note detection can
be activated when the unit is powered up.
• If the machine detects a half-note when counting, it will stop and emit
beeping sound, while the batch display will show the message "d5" alerting
the user the presence of a half-note bill). The dubious bill will always be the
last one on the stacker. Remove the dubious bill, press RESET/AUTO button
to continue (the counting display will clear).
CAUTION:
1. It is highly recommended to contact the authorized service center or local
dealer before you do the above adjustments.
2. Improper adjustments may cause improper working condition or false
detection results.
7. FAKE MONEY ALARM
When fake money pass the machine, the counting
will stop and alarm. The function display will show
the error code. The last note on the stacker normally
is the fake money. The machine counting quantity
number is not included in this note.
8
www.PyleUSA.com
Fake money or questionable money
Remove the fake money. Press RESET/AUTO button, the machine will start
counting again.
8. ERROR CODE AND SOLUTION
The batch display may show some error code when counting, which means
there are some problems with the machine. Refer to the following diagram to
nd way to solve it.
9
www.PyleUSA.com
Advertisement
