HME Jtech Ralpha Programming Manual

A. New Pager/First time programming: (See below "B" to add/change Capcodes to Pager already in
use/field)
Insert battery – Pager will display battery condition followed with the type of pager e.g., HME Wireless and time and
date
1. Press "
"ON/OFF PAGER" – Press function key to turn the pager OFF.
2. Press and hold "
"1234". Default password is "0000". While the cursor is under the first digit "1234" press function key to change
the digit to "0". Move cursor with "
change the value to "0". Continue doing the same for the 3
3. On completion of above press the "
"ADSYSBFRQT"
Move cursor by using "
AD:
SY:
SB:
FR:
QT:
4. With the default AD selected press the "
Ex.: "1:1234560 0"
1: ID of the First Capcode
1234560: The 7-digit Capcode
0: Message Type – 0—Normal personal Message (default) / 1—Mail Drop (public) message
" twice to display function menu. Press the "
" and "
" to access the main menu as below:
" to select one of the following options:
Pager Capcode Settings

System Parameter Settings

Reserved (not used now)
Frequency Settings
Save and Quit
" for 2 seconds simultaneously. The screen will display
" to second digit "0234" and press the "
rd th
and 4 digits.
" to view the capcode settings. The following will display:
RALPHA
Key Pad Programming
" to move the cursor to
" to
1