Table of Contents
Advertisement
Discs for playback
This system can playback all digital audio CD,
finalised digital audio CD-Recordable (CDR)
discs and finalised digital audio CD-Rewritable
(CDRW)discs.
MP3-CDs (CD-ROMs with MP3 tracks)
Supported MP3 disc formats:
– ISO9660, Joliet, UDF 1.5
– Maximum title number: 511 (depending on
filename length)
– Maximum album number: 99
– Supported sampling frequencies: 32 kHz, 44.1
kHz, 48 kHz
– Supported Bit-rates: 32~256 (kbps), variable
bitrates
Different play modes: SHUFFLE
and REPEAT
You can select and change the various play
modes before or during playback.
REPEAT ............ plays the current track
continuously
REPEAT ALL ... repeats the entire disc/
programme
SHUF ................ tracks of the entire disc are
played in random order
1
To select your play mode, press MODE on the
remote control before or during playback until
the display shows the desired function.
Press 2; to start playback if in the STOP
2
position.
3
To return to normal playback, press MODE on
the remote control until the various SHUFFLE/
REPEAT modes are no longer displayed.
● You can also press STOP 9 to cancel your play
mode.
CD/MP3/WMA Operation
Programming track numbers
Programme in the STOP position to select and
store your disc tracks in the desired sequence. If
you like, store any track more than once. Up to
20 tracks can be stored in the memory.
1
In the STOP position, press PROG on the
remote control to enter the programming
mode.
Use ¡1 / 2™ (í/ë on the remote) to
2
select your desired track number.
● For MP3/WMA disc, press ALBUM+/- and ¡1
/ 2™ (í/ë on the remote) to select the
desired album and title for programming.
➜ The selected track number and
the display panel.
3
Press PROG on the remote control to confirm
the track number to be stored.
4
Repeat steps 2-3 to select and store all desired
tracks.
5
To start playback of your disc programme, press
2;.
Note:
– If you wish, you can add further tracks to your
current program. Make sure you are in the STOP
position, and that you have not exceeded 20
tracks.
Erasing the programme
You can erase the programme by:
● pressing STOP 9 once in the STOP mode;
● pressing STOP 9 twice during playback;
● opening the CD compartment;
● selecting another sound source
➜
disappears from the display.
PROG
flash on
PROG
11
Advertisement
Table of Contents
