Advertisement
Installation
The installation of the unit must be performed by a qualified technician only.
Place the device on top of a solid, even, safe and stable surface that tolerates
the weight of the unit.
Ensure no flammable products are placed near the unit, as it will get hot.
Position the device appropriately so that the plug is always accessible. Also
ensure the unit isn't placed close to any water.
Operating Instructions
1. Before first use, clean the inside chamber and the tray grids with a damp
cloth.
2. After cleaning, dry the unit thoroughly before use.
3. Connect the unit to a suitable power supply and turn the power switch
on.
4. Rotate the thermostat clockwise to your required temperature, the
yellow heating light will illuminate.
5. The inside temperature of the unit is clearly displayed on the
temperature display on the front of the unit.
6. After use ensure unit is turned off both at the power switch and at the
mains.
Maintenance
Cleaning:
It is advised that the unit should be cleaned on a weekly basis to prolong its life
and ensure it continues to run correctly. Prior to cleaning ensure the device is
switched off and unplugged from the mains. Also, allow sufficient time for the
unit to cool if cleaning the cabinet shortly after use.
Advertisement
