Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Boser BBS-3001
Summary of Contents for Boser BBS-3001
- Page 1 BBS-3001 High Speed, Fanless PC with Slim CD-ROM, 12V DC Adapter...
- Page 2 Unauthorized reproduction, transmission, translation, and storage of any form and means (i.e., electronic, mechanical, photocopying, recording) of this document, in whole or partly, is prohibited, unless granted permission by BOSER Technology Co., Ltd. reserves the right to change or improve the contents of BOSER Technology Co., Ltd.
-
Page 3: Table Of Contents
Table of Contents Chapter 1 General Description ........1 1.1 Major Features ............... 2 1.2 Specifications ................ 2 1.3 Dimensions ................6 Chapter 2 Unpacking ..........7 2.1 Opening the Delivery Package..........7 2.2 Inspection................7 Chapter 3 Hardward Installation ......9 3.1 Hardware Installation ............9... - Page 4 Declaration of Conformity -- CE Mark BOSER Technology hereby acknowledges that compliance testing in accordance with applicable standards of the EU’s EMC Directive, 89/336/EEC, was successfully completed on a sample of the equipment identified below: Equipment Class: Information Technology Equipment...
- Page 5 Safety Instructions The safety recommendations outlined in this section are to be read, understood and followed before operating the product. Keep this information in a safe place for future reference. Failure to comply with any of the following safety procedures could result in serious hazard. Do not operate product for any purposes other than its intended use This product is intended for indoor use only Do not operate product if power cord is damaged in anyway...
- Page 6 This page intentionally left blank.
-
Page 7: Chapter 1 General Description
Chapter 1 General Description The BBS-3001 series is an industrial Fanless PC. The rear design of BBS-3001 series enhanced the disassembly process when required. It also supports various mounting solution for different application. This model can accommodate BOSER’s mini ITX board. The BBS-3001 series provides HDMI, DVI/CRT, RJ-45, wireless LAN, parallel, audio, COM, USB and KB/MS ports. -
Page 8: Major Features
The BBS-3001 series comes with the following features: Heat pipe, fanless PC design Built-in 12V DC adapter BBS-3001-J w/HS-1746, provides Intel® P-M/C-M processor, 2 x COM, 6 x USB2.0, parallel BBS-3001-N w/HS-1748, provides Intel® P-M/C-M processor，2 x COM, 6 x USB2.0, DVI display BBS-3001-O w/HS-1755-NF93, provides Intel®... - Page 9 COM 2 COM 1 DC Adapter In LAN + USBB2.0 * 2 LAN + USBB2.0 * 2 Parallel BBS-3001-N SBC Model HS-1748 Intel® Pentium® M/Celeron® M processor in the u-FCPGA 478 package (option) BIOS Award BIOS with 4Mb Flash EEPROM System Chipset Intel®...
- Page 10 LAN + USBB2.0 * 2 USB2.0 * 2 LAN * 2 Line In COM 2 Line Out MIC In BBS-3001-O SBC Model HS-1755-NF93 Supports Intel® 45nm Penryn Mobile processors Front Side Bus 1066MHz BIOS Award 8Mb DIP Flash ROM System Chipset Intel®...
- Page 11 LAN + USBB2.0 * 2 Line Out COM 3 LAN + USBB2.0 * 2 MIC In HDMI COM 1 COM 2 BBS-3001-Q SBC Model HS-1750 Intel® Core Duo T2050 processor (option) BIOS Award BIOS with 4Mb Flash EEPROM System Chipset Intel®...
-
Page 12: Dimensions
Ethernet Chipset Dual Marvell 88E8053 10/100/1000 Mbps LAN Drive Bay 1 x 2.5” HDD space 1 x Slim CD-ROM space Watchdog Timer Reset: 1 sec.~255 min. and 1 sec. or 1 min./step External I/O 4 x COM, PS/2 MS, PS/2 KB, VGA, DVI, 2 x LAN, 6 x USB2.0, Line In, Line Out, MIC In Rear I/O COM 3... -
Page 13: Chapter 2 Unpacking
Chapter 2 Unpacking Opening the Delivery Package The BBS-3001 series is packed in an anti-static bag. The board has components that are easily damaged by static electricity. Do not remove the anti-static wrapping until proper precautions have been taken. Safety instructions in front of this manual describe anti-static precautions and procedures. - Page 14 This page intentionally left blank.
-
Page 15: Chapter 3 Hardward Installation
Chapter 3 Hardware Installation This chapter tells how to install components into the fanless PC system. External interface please refers to system board’s manual. Hardware Installation Remove 4 screws (NO.1~4) to open the top cover. - Page 16 Remove 4 screws (NO.5~8) to open the base cover. Remove 2 screws (NO.9~10) to loosen the CD-ROM Cut-out cover, and install the slim CD-ROM. Use 4 screws to install the 2.5” HDD (NO.11~14) on to the base plate.
- Page 17 Complete the HDD and slim CD-ROM installation (as shown in the picture). Install the CPU and Memory Module onto the board.
- Page 18 Put the GR-Hm 15*15*1mm thermal tape on the NO.17 area, and the GR-Hm 35*40*0.5mm thermal tape on the NO.18 area. NOTE: Please make sure to remove the paper sticker on top of the thermal adhesive. Match the heat sink holes on to the Board, and use 4 special screws to tie the heat sink up from the base side.
- Page 19 10. Plug in the IDE cable 40P(2.54*2)-44P(2.0)-45cm into the board. 11. Plug in the USB cable in the red square area. 12. Plug in the IDE cable 40P(2.54*2)-44P(2.0)-45cm in to the slim CD-ROM and 2.5” HDD.
- Page 20 13. Install the board with 4 screws in the red circle area, and plug in the heat pipe into the heat sink in the red square area with the thermal compound. 14. Put the thermal compound onto the heat pipe holder kit. 15.
- Page 21 16. Install two COM port cables. 17. Plug in two COM port cables onto the board in the red circle area.
- Page 22 18. Complete COM ports installation in the red square area. 19. Put the GR-Hm 35*40*0.5mm thermal tape on top of the heat sink in the red square area, and put the top cover back. 20. Put the base cover back onto the bottom.
Need help?
Do you have a question about the BBS-3001 and is the answer not in the manual?
Questions and answers