Sinotec CT-714 User Manual

Sinotec CT-714 User Manual

Digital wooden clock

Advertisement

Quick Links

Main Features:

-Time Display Mode:
-Calendar Mode:
-Alarm Mode:
-Temperature Mode:
-Power saving mode:
-Power supply:

FULL Screen Display

PM Indicator
Alarm Symbol

Operating Instructions:

After switching it on, the LED turns on with a beeping sound and the device will enter the time setting mode.
Under time display mode, press the SET button to check below in sequence
Time --> Calendar --> A1(Alarm 1), A2(Alarm 2), A3(Alarm 3) --> Temperature

Time Setting:

1. Under the Time Mode, press and hold the SET button for 2seconds to set the clock.
2. Press the SET button repeatedly to set the time in the following sequence :
12/24hr switchover --> Hour --> Minute -->Exit
3. Press the UP/DOWN buttons to adjust the hour and minute digits. Press and hold the UP/DOWN buttons to
speed up the scanning of the digits.
4. When the 12 hour format is set, the PM indicator on the top left corner will appear in the afternoon.
5. The setting mode will return to time display mode if there is no operation for 15 seconds.

Date Setting:

1. Under the Calendar Mode, press and hold the SET button for 2 seconds to set the date.
2. Press the SET button repeatedly to set the date in the following sequence:
Year -->month-->day-->Exit
3. Press the UP/DOWN buttons to adjust the year, month and date. Press and hold the UP/DOWN buttons to
speed the scanning of the digits.
DIGITAL WOODEN CLOCK
USER MANUAL
12 or 24 hour time display
Display month and date
Triple alarm time setting
Range from 0℃ - 50℃(32℉ - 122℉)
dp-1,dp-2 and dp-3
Activate LED display by sound or touch
3xAAA Batteries or USB Cable
3V built-in battery to keep time memory
Temperature Symbol

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CT-714 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Sinotec CT-714

  • Page 1: User Manual

    DIGITAL WOODEN CLOCK USER MANUAL Main Features: -Time Display Mode: 12 or 24 hour time display -Calendar Mode: Display month and date -Alarm Mode: Triple alarm time setting -Temperature Mode: Range from 0℃ - 50℃(32℉ - 122℉) -3 Display Modes: dp-1,dp-2 and dp-3 -Power saving mode: Activate LED display by sound or touch...
  • Page 2 4. The setting mode will return to time display mode if there is no operation for 15 seconds. Alarm Setting There are 3 alarm time settings so you can store 3 different alarm times in the memory. 1. Under the Alarm Mode A1, press the UP button to turn the alarm on, press again to turn off. 2.
  • Page 3 Power saving and Touch control mode *The default mode is Sd (power saving off). Under Time Mode press the DOWN key to turn the Power Saving Mode on. The clock will then display ‘oN Sd’, press DOWN again to turn the Power Saving Mode off. *Under Power Saving Mode, the LED display will automatically turn off without any operation for 10 seconds.

Table of Contents