Parts And Tools Included; Tool Needed For Assembly; Step 1 - Humanscale NeatTech Installation Manual

PARTS AND TOOLS INCLUDED

1x Set of Hooks
4x #10 x 5/8" Screw
1x Basket Assembly
4x #10 x 1" Screw

TOOL NEEDED FOR ASSEMBLY

Philips Head Screwdriver

STEP 1

x2
Using the template printed on the box, mark where the hooks will be on the bottom of the work
surface. Install the hooks with the arrows pointing to the front of the desk using two screws per
hook of the correct corresponding screw. If using a work surface:
Less than .875" in thickness use the shorter screws (#10 x 5/8") provided
Greater than .875" in thickness use the longer screws (#10 x 1") provided