Advertisement
Assembling your light
Don't remove the protective
wrapping from the horizontal
arm before your light has
been assembled.
Place the base on the floor
and insert the vertical stem
into the base.
Positioning your light
You can easily change the position of your light by independently
rotating the optical head, arm and stem up to 360°.
Insert the screw into the
vertical stem and tighten fully,
with the tool supplied.
Insert the power cable into the
base, making sure it sits in the
cable guide.
Remove any protective
wrapping from your light.
Plug in and switch on.
Download the Dyson link app
and add your light.
3
Color
Power
Brightness
temperature
Settings
Advertisement
