GDP EZ LYNK Auto Agent Quick Manuals

How to establish a
Use the following steps to establish a new connection with your AutoAgent™
and ensure vehicle communication.
Step 1
Unplug the AutoAgent™ directly from the
Step 2
Boot your ECM by placing your key into the 'Run' position.
Step 3
Plug the AutoAgent™ directly into the
Step 4
Verify that a solid
green
If only a light is visible, unplug and replug.
Step 5
Connect to the EZLYNK_#### network from your mobile device.
Step 6
Open the AutoAgent™ and verify that your vehicle reads 'Connected'.
How to
Use the following steps to adjust and apply vehicle details using the AutoAgent™ app.
Step 1
From the Vehicles screen of the app, select your vehicle.
Step 2
Select Vehicle Details
Step 3
Adjust your details to fit any vehicle modifications or desires.
Step 4
Select an ECU profile that you wish to install to apply the changes.
Changes are not applied automatically and must be programmed.
Step 5
When your installation has finished, verify any changes made to your vehicle.
Quick Guides
blue
light is visible on the AutoAgent™ device.
Change
and then select Edit.
GDPTUNING
www.
page 1
connection With your vehicle
OBD-II port.
OBD-II port.
your vehicle details
.com