Table of Contents
Advertisement
Quick Links
Door Lock Battery Installation – Kwikset SmartCode 914
What You'll Need
•
Kwikset SmartCode 914 Lock
•
Allen wrench
•
Four non-rechargeable AA batteries
How to Install the Batteries
Before proceeding, please be sure that your system is disarmed. Working on devices while the system is armed can
generate false alarms.
Did You Know? Removing batteries without putting the system in Test mode could trigger an alarm, dispatch police/fire
assistance, and may result in a fine for a false alarm.
Is This Your Door Lock? Make sure that
your Door Lock looks like the one in the
image. If it does, you have the right
document to find out how to install a battery
in your Door Lock.
1. Move the turn bolt on the interior lock face
to the vertical position.
2. Insert an Allen wrench, with ball tip, into the
screw on the left side of the battery cover
and turn counter-clockwise to loosen and
remove the screw. Repeat this step for the
screws on the right side and bottom of the
battery cover.
3. Remove the battery cover by pulling it
straight out from the lock body.
4. Pull the battery pack up and out of the lock
body.
Take a Look. If batteries are already present,
remove them by gently using your fingertip to
pull one end of the battery up until the battery
is loose and you can pull it free from the slot.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Comcast Kwikset SmartCode 914
- Page 1 Door Lock Battery Installation – Kwikset SmartCode 914 What You’ll Need • Kwikset SmartCode 914 Lock • Allen wrench • Four non-rechargeable AA batteries How to Install the Batteries Before proceeding, please be sure that your system is disarmed. Working on devices while the system is armed can generate false alarms.
- Page 2 5. The battery compartment contains a diagram of the proper battery position with a symbol indicating which way the positive (+) end of the battery should be facing. Insert four non-rechargeable AA batteries into the battery slots in the battery pack, position the positive (+) end of the batteries as shown in the battery diagram.
Need help?
Do you have a question about the Kwikset SmartCode 914 and is the answer not in the manual?
Questions and answers