Table of Contents
Advertisement
GETTING STARTED
OPERATION/GETTING STARTED
NOTE
– Unless otherwise mentioned, all operations can be carried
out with the remote control. Always point the remote control
directly at the player, making sure there are no obstructions
in the path of the infrared beam.
– When there are corresponding keys on the front panel, they
can also be used.
SWITCHING ON
Switch on the TV and select the video input for your DVD-
Video player.
To enjoy sound through your stereo system, turn on the system
and select the source input for the DVD-Video player.
To enjoy DVD-Video with multichannel (surround) sound,
switch on the Home Theatre system and select the source input
for your video player.
• On the front of the DVD-Video player, press Power On/Off.
The player display lights, and the OSD invites you to load a
disc.
• With Autoplay on (the factory setting) any disc already
loaded in the player starts to play.
LOADING A DISC
• Press Open/Close (6) on the front of the player. The disc
loading tray opens.
• Lay your chosen disc in the tray, label side up. Make sure it is
sitting properly in the correct recess.
• Gently push the tray, or press Open/Close, to close the tray.
– With Autoplay on (the factory setting) play starts.
– With Autoplay off, the (play) screen for the type of disc
loaded appears on the OSD, and information about the disc's
contents and total playing time appear on the display.
– To turn Autoplay off or on, see Settings (p. 15).
NOTE
– Since it is usual for DVD movies to be released at different
times in different regions of the world, all players have region
codes and discs can have an optional region code. If you load
a disc of a different region code to your player, you will see
the region code notice on the screen. The disc will not play,
and should be unloaded.
P O W
E R O
N /O
F F
10
TIT LE
CH AP
TE R
R E P
E A T
TI T
Advertisement
Table of Contents
